Fujitsu Siemens Computers 4312 FA manual Brightness, Monitor settings using the OSD menu

Page 16

Colour monitor 4312 FA

Carry out auto-adjustment of the monitor for the current resolution

With the AUTO button you can start the auto-adjustment for the current resolution. During the auto- adjustment the display Auto adjustment is shown.

During auto-adjustment the functions Fine, Coarse and Position are carried out (see Image Lock, Horizontal and Vertical adjustment window). For this purpose a screen display must be present which has a few light dots in the first and last column and in the first line. The Windows desktop usually fulfills this condition.

When changing the monitor controller to a mode (resolution and refresh rate) in which the monitor has not been operated up until then, the monitor automatically executes the Auto adjustment function.

i

Should you be dissatisfied with the results of the auto adjust function, then set the basic

setting of the monitor with the floppy disk provided.

Monitor settings using the OSD menu

To set the OSD menu, perform the following steps:

ÊPress the MENU button to activate the OSD menu.

The main menu appears on the screen with icons for the setting functions.

K

i

Brightness

80

The last icon set is marked (in this case Brightness). At the same time, the corresponding setting window appears.

ÊIf necessary, use the - or + button to mark another icon, e.g. Contrast.

The displayed setting window changes when changing from one symbol to another.

ÊPress the MENU button to activate the highlighted icon.

ÊUse the buttons - or + (in accordance with the displays in the menu) to make changes.

S26361-K841-V150-1-5E19

English - 13

Image 16
Contents 4312 FA Contents Page Target group IntroductionFurther information Important notes SafetyNotational conventions Cleaning notes Transport notesManufacturer’s notes FCC Class B Compliance StatementEnergy Star CE markingImportant note on power cable Declaration of ConformityChecking the contents of the consignment Installing an ergonomic video workstation Height adjustment and ability to turn Connecting the monitor = Power button = Power indicator Operation of the monitorSwitching the monitor on/off Stage Standby mode Suspend mode OFF modeChanging the monitor settings Basic monitor settings with the floppy disk suppliedMonitor settings using the OSD menu BrightnessAdjusting the contrast Adjusting the brightnessAdjusting the horizontal position Activating the factory settings Adjusting the vertical positionSetting colour ratios Switching full-screen mode on or off Setting language for the OSD menuSetting transparency for the OSD menu Setting position for the OSD menuLocking menu items of OSD menu Releasing locked menu items of OSD menuTechnical data Power supply plug Preset operating modesVESA-DDC-compatible VGA interface Trouble shooting No display power indicator does not lightPin assignment D-SUB Pin MeaningPermanently unlit or lit pixels No display power indicator lightsScreen becomes darker Why do we have environmentally labelled computers? TCO99Congratulations What does labelling involve?Environmental requirements