Fujitsu Siemens Computers 4312 FA manual Connecting the monitor

Colour monitor 4312 FA

Connecting the monitor

See your system unit's operating manual for details of the connectors and interfaces on the system unit.

!	Please note the information provided in the "Safety" section in the chapter "Important
	notes" at the beginning of this manual.

Do not cover the ventilation openings of the monitor.

3	1
5
4	2

ÊBe sure that the monitor and the system unit are switched off.

!The system unit's power plug must be pulled out!

The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the system unit.

ÊConnect one of the connectors of the data cable to the D-SUB connector on the monitor (1) and secure the plug-in connection by tightening the safety screws.

ÊConnect the other connector of the data cable to the (active) monitor port on the system unit and secure the plug-in connection by tightening the safety screws (2).

S26361-K841-V150-1-5E19 English - 9