JVC SR-DVM600U manual Basic Connections, Connecting to a TV Monitor, Connecting to a DV Device

18 EN INSTALLING YOUR NEW UNIT

Basic Connections		OPERATION CAN BE PERFORMED.
		THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO
Another Recorder	Camcorder	Connecting to a TV Monitor

Audio/Video	S-video cable
cable	(not supplied)	Audio/Video	S-video cable
(not supplied)
	To [S-VIDEO	cable	(not supplied)
		(not supplied)
	INPUT]
AC outlet	To [AUDIO/VIDEO INPUT]
			To [S-VIDEO
AC power cord			INPUT]

Back of unit
To	To	To	To
[COMPONENT	[VIDEO	[AUDIO/	[S-VIDEO
VIDEO OUT	OUTPUT]	VIDEO	OUTPUT]
(Y/PB/PR)]		OUTPUT]
Component video	BNC video	Audio/Video	S-video cable
cable	cable	cable	(not supplied)
(not supplied)	(not supplied)	(supplied)

TV

It’s essential that your unit be properly connected.

Connect the unit to a TV depending on the TV and cables you use.

8AV Connection

To connect to a TV with AV connector ^

AConnect the [AUDIO/VIDEO OUTPUT] connectors on the rear panel of the unit and the TV’s audio/video input connectors with the supplied Audio/Video cable.

To connect to a TV with BNC connector ^

AConnect an optional audio cable between the [AUDIO OUTPUT] connectors on the rear panel of the unit and the TV’s audio input connectors.

BConnect an optional BNC video cable between the unit’s BNC [VIDEO OUTPUT] connector and the TV’s BNC VIDEO input connector.

8S-Video Connection

To connect to TV’s S-VIDEO input and AUDIO input connectors ^

AConnect the unit’s [S-VIDEO OUTPUT] connector to the TV’s S-VIDEO input connector.

BConnect the unit’s [AUDIO OUTPUT] connectors to the TV’s AUDIO input connectors.

●If your TV is not stereo-capable, use the unit’s [AUDIO OUTPUT] connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.

8Component Video Connection

To connect to TV’s component video input connectors ^

AConnect the unit’s [COMPONENT VIDEO OUT (Y/PB/PR)] connectors to the TV’s component video input connectors.

BConnect the unit’s [AUDIO OUTPUT] connectors to the TV’s AUDIO input connectors.

●You can obtain high-quality component video pictures.

●The [COMPONENT VIDEO OUT (Y/PB/PR)] connectors do not output DV signals.

●If your TV is not stereo-capable, use the unit’s [AUDIO OUTPUT] connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.

●By using the component video connection, you can view the images in the progressive mode. For switching to the progressive mode, refer to AScan Mode Set (HDD & DVD Deck Only)B (A pg. 65).

ATTENTION:

Connect the AC plug only after all connections to the TV has been completed.

●Make sure the package contains all of the accessories listed in ASPECIFICATIONSB (A pg. 86).

●Place the unit on a stable, horizontal surface.

Connecting to a DV Device

AConnect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT] connector on the front panel to the camcorder’s s-video or video output connector.

BConnect the unit’s [AUDIO INPUT] connectors on the front panel to the camcorder’s audio output connectors.

Connecting to Another Recorder

AConnect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT] connector to another recorder’s s-video or video output connector.

BConnect the unit’s [AUDIO INPUT] connectors to another recorder’s audio output connectors.

Plug the end of the AC power cord into an AC outlet.

●APLEASEB and AWAITB blink alternately on the front display panel when the AC plug of the AC power cord is connected into an AC outlet. After a short while, A32**B blinks on the front display panel and starts to count down.

It takes approximately 50 seconds for the unit to be turned on. This is not a malfunction.