JVC SR-DVM600U manual Dubbing From DV To HDD, Dubbing An Entire Cassette, Dubbing From DV To DVD

		EDITING EN 47
Dubbing From DV To HDD		● If the DV deck is in the stop mode, the unit will start dubbing
(Dubbing An Entire Cassette)		from the current tape position.
		● If the DV deck is in the pause mode, the unit will start dubbing
		from the point where the tape was paused after automatically
It is possible to perform automatic dubbing of all the recorded
		rewinding the tape for 2 seconds.
programs of a cassette from the DV deck to the HDD deck using
		● To cancel the dubbing, press o then selection keys to select
the AENTIREB dubbing. You cannot select the images to be
		ACANCELB and press ENTER to confirm.
dubbed; all recorded images on the DV cassette will be dubbed.
	9 Upon completing dubbing, the tape stops and ADUBBING
1 Load the Mini DV cassette you want to dub. Make sure its erase
		COMPLETEDB appears on the TV screen. Press ENTER to
protection switch is set to ASAVEB.
		end.
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60)
		● The tape will automatically be rewound.
2 Press DUBBING to access the Dubbing Menu screen.
		NOTES:
3 Press selection keys to select ADVNHDDB, then press
	● When there are blanks on the tape of more than 2 seconds, the
ENTER.		HDD deck will enter into pause mode while playback on DV deck
4 Select AENTIREB, then press ENTER.		continues. This also applies to portions of the DV tape that are
5 Press selection keys to select ASELECT RECORDING		damaged or unreadable. The last image is displayed on the TV
		screen. Dubbing will resume once recorded portion is detected. If
MODEB, then press ENTER. Press selection keys to select
		the blank portion continues until the end of the tape, ADUBBING
the desired option, then press ENTER.
		COMPLETEDB appears on the TV screen when the tape end is
6 Press selection keys to select ASELECT SOUND MODEB,
		reached and the tape rewinds automatically.
then press ENTER. Press selection keys to select the desired	● Dubbing copyright guarded tape is not possible.
option, then press ENTER.	● When dubbing is in progress, o, ON SCREEN and AUDIO
7 Press G to select ACONFIRMB, then press ENTER. The		buttons are functional.
confirmation screen appears.	Dubbing From DV To DVD
8 Press selection keys to select AEXECUTEB, then press
ENTER for confirmation.	(Dubbing An Entire Cassette)
● Once dubbing starts, it will continue dubbing until the end of the
	It is possible to perform automatic dubbing of all the recorded
tape is reached.
● To cancel the dubbing, press o then selection keys to select	programs of a cassette from the DV deck to the DVD deck using
ACANCELB and press ENTER to confirm.	the AENTIREB dubbing. You cannot select the images to be
● If the tape is not rewind, the unit will start dubbing after	dubbed; all recorded images on the DV cassette will be dubbed.
automatically rewinding the tape to the beginning.	1 Load the Mini DV cassette you want to dub. Make sure its erase
9 Upon completing dubbing, the tape stops and ADUBBING		protection switch is set to ASAVEB.
COMPLETEDB appears on the TV screen. Press ENTER to		● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60)
end.	2 Press DUBBING to access the Dubbing Menu screen.
● The tape will automatically be rewound.	3 Press selection keys to select ADVNDVDB, then press
NOTES:		ENTER.
● When there are blanks on the tape of more than 2 seconds, the	4 Select AENTIREB, then press ENTER.
HDD deck will enter into pause mode while playback on DV deck
	5 Press selection keys to select ASELECT RECORDING
continues. This also applies to portions of the DV tape that are
damaged or unreadable. The last image is displayed on the TV		MODEB, then press ENTER. Press selection keys to select
screen. Dubbing will resume once recorded portion is detected. If		the desired option, then press ENTER.
the blank portion continues until the end of the tape, ADUBBING	6 Press selection keys to select ASELECT SOUND MODEB,
COMPLETEDB appears on the TV screen when the tape end is		then press ENTER. Press selection keys to select the desired
reached and the tape rewinds automatically.		option, then press ENTER.
● Dubbing copyright guarded tape is not possible.	7 Press G to select ACONFIRMB, then press ENTER. The
● When dubbing is in progress, o, ON SCREEN and AUDIO
		confirmation screen appears.
buttons are functional.
	8 Press selection keys to select AEXECUTEB or AAUTO
Dubbing From DV To HDD
		FINALIZEB, then press ENTER for confirmation.
(Dubbing A Part of A Cassette)		● Once dubbing starts, it will continue dubbing until the end of the
		tape is reached.
		● To cancel the dubbing, press o then selection keys to select
It is possible to select the images on the DV cassette to be dubbed
		ACANCELB and press ENTER to confirm.
from the DV deck to the HDD deck using AMANUALB dubbing.
		● If the tape is not rewind, the unit will start dubbing after
1 Load the Mini DV cassette you want to dub. Make sure its erase
		automatically rewinding the tape to the beginning.
protection switch is set to ASAVEB.	9 Upon completing dubbing, the tape stops and ADUBBING
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 60)
		COMPLETEDB appears on the TV screen. Press ENTER to
2 Press DUBBING to access the Dubbing Menu screen.
		end.
3 Press selection keys to select ADVNHDDB, then press		● The tape will automatically be rewound.
ENTER.		NOTES:
4 Select AMANUALB, then press ENTER.	● The program information at the DV deck will not be dubbed.
5 Press selection keys to select ASELECT RECORDING	● When there are blanks on the tape of more than 2 seconds, the
		DVD deck will enter into pause mode while playback on DV deck
MODEB, then press ENTER. Press selection keys to select
		continues. This also applies to portions of the DV tape that are
the desired option, then press ENTER.
		damaged or unreadable. The last image is displayed on the TV
6 Press selection keys to select ASELECT SOUND MODEB,
		screen. Dubbing will resume once recorded portion is detected. If
then press ENTER. Press selection keys to select the desired		the blank portion continues until the end of the tape, ADUBBING
option, then press ENTER.		COMPLETEDB appears on the TV screen when the tape end is
7 Press G to select ACONFIRMB, then press ENTER. The		reached and the tape rewinds automatically.
confirmation screen appears.	● Dubbing copyright guarded tape is not possible.
8 Press selection keys to select AEXECUTEB, then press	● When dubbing is in progress, o and ON SCREEN buttons are
		functional.
ENTER for confirmation.