JVC SR-DVM600U manual Digital Audio Dubbing, Example Dubbing to an MD

						EDITING EN 53
	Digital Audio Dubbing				1	Connect the unit and a digital audio device using either an
					2	optional optical cable or an optional coaxial cable.
						Place a disc on the unit and load an MD on the connected
You can dub selected audio from a DVD or Audio CD disc to a
						digital audio device.
digital audio device.
					3 Select the audio to be dubbed.
However, it is not possible to dub copy-protected discs.
					4	Start playback slightly before the actual point from where you
● Turn on the TV and select the AV mode.						wish to start dubbing.
● Slide the TV/DVD switch to DVD.					5 Press W to pause playback.
Example: Dubbing to an MD					6	Select the input mode on the connected digital audio device.
			Recorder		7 Press I to start playback on the unit.
					8	Start recording on the digital audio device.
					9	Stop recording on the digital audio device. Then press oto stop
						playback on the unit.
					NOTE:
					There may be a discrepancy of several seconds between where
					you intend editing to start, and where it actually starts.
		Digital audio device
		(MD deck, etc.)
		Coaxial cable		Optical cable
		(not supplied)		(not supplied)
		To [DIGITAL AUDIO		To [DIGITAL AUDIO
		OUTPUT (COAXIAL)]		OUTPUT (OPTICAL)]

Player

Rear of unit

Note for connection:

Remove the protection cap from the optical cable.