JVC SR-DVM600U manual When using your unit as the source player

52 EN EDITING
Edit To Or From Another Recorder		● Slide the TV/DVD switch to DVD.
You can use your unit as the source player or as the recording		1 Make connections.
		A When using your unit as the source player:
deck.
		^ connect its [S-VIDEO/VIDEO/AUDIO OUTPUT] connectors
NOTES:		to the input connectors on another recorder.
		B When using your unit as the recording deck:
● When using another recorder as the recording deck, refer to its
		^ connect its [S-VIDEO/VIDEO/AUDIO INPUT] connectors on
instruction manual.
		the front or rear panel to the output connectors on another
● It is not possible to dub copy-protected contents. An error
		recorder.
message will appear on the TV screen.
		● When connecting to another recorder with S-video connector,
A When using your unit as the source player		set AREAR AUX L-1B or AFRONT AUX F-1B to AS-VIDEOB.
		2 Press INPUT SELECT +/– on the remote control or
TV
		INPUT SELECT on the unit to select the external input.
Player	Your unit	● Select AF-1B when the source player is connected to the unit’s
		[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
		front panel, and select AL-1B when it is connected to the unit’s
		[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
		rear panel.

Another recorder

3Press REC MODE repeatedly to set the recording mode.

4Engage the Play mode on the source player.

5Engage the Record mode on the recording deck.

6Stop recording on the recording deck, then stop playback on the source player.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 59)

Recorder

BWhen using your unit as the recording deck

TV
Recorder	Your unit

Another recorder

Player