JVC SR-DVM600U manual Video / S-VIDEO

60 EN SUBSIDIARY SETTINGS

VIDEO IN/OUT
		NOTE:
8 MONITOR TYPE	^ 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX	To display the ADV SET UPB menu, press SET UP while in the
		DV deck mode.
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For		DV SET UP
details, refer to AMonitor SetB (A pg. 21).
		8 DV AUDIO REC ^12BIT / 16BIT
8 FRONT AUX F-1	^ VIDEO / S-VIDEO
		This is the setting for sound mode before recording on a Mini DV
Select the appropriate mode depending on the connector (F-1)

being used on the front panel. tape.

VIDEO:		12BIT:
			Enables Audio Dubbing later.
To use the [VIDEO] input connector on the front panel.
		16BIT:
S-VIDEO:
			Audio Dubbing is not possible but the recorded sound quality is
To use the [S-VIDEO] input connector on the front panel.
			higher than A12BITB.
8 REAR AUX L-1 ^ VIDEO / S-VIDEO
	8		AUDIO MODE ^ SOUND1 / SOUND2 / MIX
Select the appropriate mode depending on the connector (L-1)

being used on the rear panel.	You can select the desired sound mode when playing back an
	audio dubbed Mini DV tape.
VIDEO:
	SOUND1:
To use the [VIDEO INPUT] connector on the rear panel.
	Original recorded sound.
S-VIDEO:
	SOUND2:
To use the [S-VIDEO INPUT] connector on the rear panel.
	Audio dubbed sound.
	MIX:
	Original recorded sound and audio-dubbed sound.
	NOTES:
	● When AAUDIO MODEB is set to AMIXB, both the main and sub
	audio will be audible for bilingual tapes.
	● To select only the main audio or only the sub audio of bilingual
	tapes, set AAUDIO MODEB to ASOUND1B.