Fujitsu Siemens Computers 4312 FA manual Important note on power cable, Declaration of Conformity

Page 8

Colour monitor 4312 FA

Important note on power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set.

The female/male receptacles of the cord set must meet CEE-22 requirements.

The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors.

For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used.

The cable set must be selected according to the rated current for your device.

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Name:

Color LCD Monitor

Trade Name:

Fujitsu Siemens Computers

Model Number(s):

4312 FA

Name of Responsible Party:

Siemens Information and Communication

 

Products LLC

 

3860 N. First Street

 

San Jose, CA 95134-1702

 

U.S.A.

Contact Person:

Mike Fitzner

Phone No.:

(408) 428-8918

Fax No.:

(408) 428-7290

 

 

We, Siemens Information and Communication Products LLC, hereby declare that the equipment bearing the trade name and model number specified above was tested confirming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements.

S26361-K841-V150-1-5E19

English - 5

Image 8
Contents 4312 FA Contents Page Further information IntroductionTarget group Notational conventions SafetyImportant notes Cleaning notes Transport notesManufacturer’s notes FCC Class B Compliance StatementEnergy Star CE markingImportant note on power cable Declaration of ConformityChecking the contents of the consignment Installing an ergonomic video workstation Height adjustment and ability to turn Connecting the monitor = Power button = Power indicator Operation of the monitorSwitching the monitor on/off Stage Standby mode Suspend mode OFF modeChanging the monitor settings Basic monitor settings with the floppy disk suppliedMonitor settings using the OSD menu BrightnessAdjusting the horizontal position Adjusting the brightnessAdjusting the contrast Setting colour ratios Adjusting the vertical positionActivating the factory settings Switching full-screen mode on or off Setting language for the OSD menuSetting transparency for the OSD menu Setting position for the OSD menuLocking menu items of OSD menu Releasing locked menu items of OSD menuTechnical data VESA-DDC-compatible VGA interface Preset operating modesPower supply plug Trouble shooting No display power indicator does not lightPin assignment D-SUB Pin MeaningScreen becomes darker No display power indicator lightsPermanently unlit or lit pixels Why do we have environmentally labelled computers? TCO99Congratulations What does labelling involve?Environmental requirements