Fujitsu Siemens Computers 4312 FA manual Adjusting the vertical position, Setting colour ratios

Colour monitor 4312 FA

Adjusting the vertical position

Calling the Position setting window

Shifting the picture down

Shifting the picture up

Activating the factory settings

Factory settings are available for Image Lock, picture position and colours in the preset operating modes (see table in the chapter "Technical data".

		Calling the Reset setting window
Geometry Reset		- = The user settings for picture definition and picture position are retained.
- NO	YES +	+ = The factory settings are activated.
Color Reset		- = The user settings for the colours are retained.
- NO	YES +	+ = The factory settings are activated.

!	If you press down the EXIT button for about 5 seconds, all the settings will be reset to
	factory settings!
	You can use this function when you connect your monitor to another PC or to another
	monitor controller (graphics card). The monitor then carries out the Auto adjustment feature
	for each new mode.

Setting colour ratios

	K	Calling the Color Temperature setting window
User Adjusted...		Setting user-defined colours:
		With the submenus R (Red), G (Green) and B (Blue) you can increase or
		decrease the corresponding colour ratios (Red, Green, Blue).
Reddish		Selecting reddish colour setting
Bluish		Selecting bluish colour setting

S26361-K841-V150-1-5E19 English - 15