Cisco Systems ASR 903 manual OC-3 Interface Module LEDs, Color/State Description

Chapter 5 Troubleshooting

LED Summary

Table 5-13	Interface Module LEDs
LED	Color/State	Description
Power	Off	Disabled/no power to IM
(PWR)
	Green	Enabled and power rails on IM in range
Status	Off	Disabled/power-down
(STAT)
	Red	Failure (on at reset)
	Amber	Booting (if local CPU)
	Green	Operational
Link status	Off	Inactive or no connection
(L)
	Amber	Fault/loop condition
	Green	Ok with no activity
	Flashing	OK with activity
	green
Speed (S)	Off	100/10 Mbps/Slow
	Green	1Gbps/Full

OC-3 Interface Module LEDs

Table 5-15summarizes the LEDs for the OC-3 interface module.

Table 5-14	Interface Module LEDs
LED	Color/State	Description
Power	Off	Disabled/no power to IM
(PWR)
	Green	Enabled and power rails on IM in range
Status	Off	Disabled/power-down
(STAT)
	Red	Failure (on at reset)
	Amber	Booting (if local CPU)
	Green	Operational
Carrier/	Green	SFP receiving good remote signal
Alarm (C/A)
	Yellow	Remote or local alarm activated
Active/	Green	SFP ready and operating normally
Loopback
	Yellow	SFP port in loopback state
(A/L)

	Cisco ASR 903 Router Hardware Installation Guide
5-10	OL-25178-05