Cisco Systems ASR 903 manual Troubleshooting

Contents

				Uninstalling the Cisco Microsoft Windows USB Driver 3-35
				Connecting to the Auxiliary Port				3-36
				Connecting a Management Ethernet Cable							3-38
				Installing and Removing SFP and XFP Modules								3-38
				Connecting a USB Flash Device				3-38
				Removing a USB Flash Device					3-39
				Connecting Timing Cables		3-39
				Connecting Cables to the BITS Interface							3-39
				Connecting Cables to a GPS Interface							3-41
				Connecting Ethernet Cables			3-42
				Connecting Cables to SFP Modules					3-43
				Connecting T1/E1 cables		3-43
				Installing the Cable Connector					3-43
				RJ45 Cable Pinouts		3-44
				Connecting Cables to the Patch Panel							3-44
				Recommended Patch Panel				3-45
				Connecting Serial Cables		3-45
				Connecting the Fan Tray Alarm Port					3-47
				Connector and Cable Specifications					3-47
				Cisco ASR 903 Router Initial Configuration
C H A P T E R		4								4-1
				Checking Conditions Prior to System Startup						4-1
				Powering Up the Cisco ASR 903 Router					4-2
				Verifying the Front Panel LEDs				4-5
				Verifying the Hardware Configuration						4-5
				Checking Hardware and Software Compatibility								4-5
				Configuring the Cisco ASR 903 Router at Startup							4-5
				Using the Console Interface			4-6
				Configuring Global Parameters				4-6
				Checking the Running Configuration Settings								4-7
				Saving the Running Configuration to NVRAM								4-7
				Safely Powering Off the Cisco ASR 903 Router							4-8
				Troubleshooting 5-1
C H A P T E R		5
				Pinouts 5-1
				BITS Port Pinout	5-1
				GPS Port Pinout	5-2
				Time of Day Port Pinout		5-2
				Alarm Port Pinout	5-3
			Cisco ASR 903 Router Hardware Installation Guide
	vi											OL-25178-05