Cisco Systems 7100 Series quick start Rack-Mount the Router

Page 6

.

Rack-Mount the Router (continued)

22064

0

2

Note: The second bracket attaches to the other side of the chassis. The brackets can also be installed with the front panel forward.

4

Attach the Router to the Rack

1

Locate the screws to mount the chassis

 

in the rack.

2

Position one person to lift the chassis

 

into the equipment rack.

3

Align the bracket holes with the

 

mounting holes in the equipment rack.

4

Use a Phillips screwdriver to attach the

 

router to the equipment rack.

Warning Do not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is off and the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected.

Image 6
Contents Quick Start Guide Page Prepare for Installation Prepare for Installation Rack-Mount the Router Rack-Mount the Router Attach the Grounding Lug Connect the Router to the Network Connect the T1 Ports Cisco 7120-4T1 only Connect the T3 Ports Connect the E3 Ports Connect the ATM T3 or E3 Ports Connect the ATM SMI3 and MM3 Ports Connect the Console Port Connect the Power Connect the Cisco 7140 Series Dual AC Power Supply Start the System Use the Setup Facility OK? Configuring global parameters Enter host name Router sanjose Start the System Review your configuration For More Information Headquarters