Cisco Systems 7100 Series quick start Review your configuration

Page 22

20

Start the System (continued)

10 Review your configuration.

The following configuration command script was created:

hostname sanjose

enable secret 5 $1$gG.I$gc9JUfK2r6pIDL0vo3j191 enable password betty

line vty 0 4 password fred no snmp-server

!

ip routing

no clns routing

!

interface FastEthernet0/0 media-type 100BaseX full-duplex

ip address 10.1.1.20 255.0.0.0

!

interface FastEthernet0/1 shutdown

no ip address

!

interface ATM1/0

ip address 10.1.1.10 255.0.0.0

!

interface ATM2/0 shutdown

no ip address

!

router igrp 15 redistribute connected network 1.0.0.0

!

end

Image 22
Contents Quick Start Guide Page Prepare for Installation Prepare for Installation Rack-Mount the Router Rack-Mount the Router Attach the Grounding Lug Connect the Router to the Network Connect the T1 Ports Cisco 7120-4T1 only Connect the T3 Ports Connect the E3 Ports Connect the ATM T3 or E3 Ports Connect the ATM SMI3 and MM3 Ports Connect the Console Port Connect the Power Connect the Cisco 7140 Series Dual AC Power Supply Start the System Use the Setup Facility OK? Configuring global parameters Enter host name Router sanjose Start the System Review your configuration For More Information Headquarters