Cisco Systems 7100 Series quick start Rack-Mount the Router

Rack-Mount the Router

Cisco 7100 SERIES

22061

22062

0

2

3

Attach the Brackets to the Router

1	Locate the brackets and screws.
2	Use a Phillips screwdriver to attach the
	brackets on the side panels of the router
	in one of the following ways:

Note: This procedure assumes you are installing the router in a rack. For tabletop installation, refer to the Cisco 7100 Series VPN Router Installation and Configuration Guide.

—Front panel forward

—Rear panel forward

Note: Although these installations show the 19-inch brackets, the procedure is the same for the larger brackets.