Cisco Systems 350, 340 manual Access Point Specifications, Category Specification

Chapter 1 Overview

Access Point Specifications

Access Point Specifications

Table 1-1 lists specifications for the access point.

Table 1-1 Access Point Specifications

Category

Specification

Physical

Size	6.30 in. (16 cm) W x 4.72 in. (12 cm) D x 1.45 in. (3.7 cm) H
Status indicators	Three indicators on the top panel: Ethernet traffic, status, and
	radio traffic
Connectors	On the back panel: An RJ-45 jack for 10/100 Ethernet
	connections; a nine-pin serial connector; a power connector
	(plug-in AC adapter) for a regulated 5V input (340 series
	only)
Voltage range	24 to 60 VDC (regulated 5 VDC for 340 series only)
Operating temperature range	32 to 122oF (0 to 50oC) for 340 and 350 series
	–4 to 131oF (–20 to 55oC) for 350 series metal case
	32 to 104oF (0 to 40oC) for power injectors
Weight	Less than 1 lb (0.45 kg) for 340 and 350 series
	1.43 lbs (0.64 kg) for 350 series metal case
Radio
Power output	100, 50, 30, 20, 5, or 1 mW for 350 series
	30, 20, 5, or 1 mW for 340 series
	(Depending on the regulatory domain in which the access point
	is installed)
Frequency	2.400 to 2.497 GHz (Depending on the regulatory domain in
	which the access point is installed)
Range	Indoor:
	150 ft at 11 Mbps (100 ft for 340 series only)
	350 ft at 1 Mbps (300 ft for 340 series only)
	Outdoor:
	800 ft at 11 Mbps (400 ft for 340 series only)
	2000 ft at 1 Mbps (1500 ft for 340 series only)
Modulation	Direct Sequence Spread Spectrum
Data rates	1, 2, 5.5, and 11 Mbps

Cisco Aironet Access Point Hardware Installation Guide

1-8 OL-0738-02