![](/images/new-backgrounds/1174466/174466125x1.webp)
Appendix B Declarations of Conformity and Regulatory Information
Declaration of Conformity for RF Exposure
The Declaration of Conformity related to this product can be found at the following URL:
http://www.ciscofax.com
For the 340 series, the following standards were applied:
•Radio: ETS 300.328
•EMC: ETS 300.826
•Safety: EN 60950
The following CE mark is affixed to the 340 series equipment:
49325
For the 350 series, the following standards were applied:
•Radio: EN
•EMC: EN 301
•Safety: EN 60950
The following CE mark is affixed to the 350 series equipment:
54613
The above CE mark is required as of April 8, 2000 but might change in the future
Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance.
Note Combinations of power levels and antennas resulting in a radiated power level of above 100 mW eirp are considered as not compliant with the above mentioned directive and are not allowed for use within the European community and countries that have adopted the European R&TTE directive 1999/5/EC and/or the CEPT recommendation Rec 70.03. For more details on legal combinations of power levels and antennas, contact Cisco Corporate Compliance.
Declaration of Conformity for RF Exposure
The radio module has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices.
Cisco Aironet Access Point Hardware Installation Guide
| ||
|