Cisco Systems 350, 340 manual Using an Internet Browser

Contents

		Installation Guidelines		2-3
		Basic Guidelines		2-3
		Special Considerations			2-3
		Coverage Options		2-3
		Minimal Overlap Coverage Option						2-4
		Multiple Overlapping Networks Coverage Option 2-4
		Heavy Overlap Coverage Option						2-5
		Site Surveys		2-5
		Unpacking the Access Point			2-6
		Package Contents		2-6
		Connecting the Ethernet and Power Cables						2-7
		Connecting Cables on 340 Series Access Points								2-7
		Connecting Cables on 350 Series Access Points								2-8
		Basic Configuration 3-1
C H A P T E R	3
		Before You Start	3-2
		Summary of Configuration Steps				3-2
		Using the IP Setup Utility			3-2
		Obtaining and Installing IPSU				3-3
		Finding the Access Point’s IP Address						3-3
		Setting the Access Point’s IP Address and SSID								3-4
		Entering Basic Settings		3-5
		Using an Internet Browser 3-5
		Using a Terminal Emulator				3-7
		Selecting Pages and Settings					3-7
		Applying Changes to the Configuration							3-7
		Assigning Basic Settings				3-7
		Default Basic Settings		3-10
		Troubleshooting
C H A P T E R	4		4-1
		Checking the Top Panel Indicators				4-2
		Checking Basic Settings		4-3
		SSID 4-3
		WEP Keys	4-3
		Resetting to the Default Configuration					4-4
		Steps for Firmware Versions 11.07 or Later							4-4
		Steps for Firmware Versions 11.06 or Earlier							4-5

	Determining the Boot-Block Version	4-5
	Cisco Aironet Access Point Hardware Installation Guide
iv		OL-0738-02