Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Associated Error Message
Address resolution problems are usually associated with the following error message:
%LANE−3−NOREGILMI: [chars] [chars] cannot register [ATM address] with ILMI
For example:
%LANE−3−NOREGILMI: ATM2/0/0.1 LEC cannot register 47.00918100000000603E5A4501.00D0069A7C40.01 with ILMI
This error message can be reported by one of the following:
∙LAN Emulation Configuration Server (LECS)
∙LAN Emulation Server (LES) or broadcast and unknown server (BUS)
∙LAN Emulation Client (LEC)
Although this document looks at the address registration problems encountered by a LEC, the explanations are also valid for registration problems with the LECS and LES/BUS.
Configure
Network Diagram
This setup illustrates the problem:
This setup uses:
∙Bernard is a Cisco 7500 router running Cisco IOS® software release 12.1(4).
∙Casimir is a LightStream 1010 running Cisco IOS software release 12.0(13)W5(19b)
∙Tintin is a Cisco 7000 router running Cisco IOS software release 11.2(22)P.
This setup uses LANE, and the LECS and LES/BUS are located on the LightStream 1010.
Note: The configuration used here does not give the best LANE performances; it is simply being used for illustration. For design recommendations regarding LANE services, refer to the LANE Design Recommendations.
Cisco − ILMI Address Registration Problems: %LANE−3−NOREGILMI