Phone features
AutoAnswer with headset or speakerphone
If you want to... | Then... |
|
Toggle speakerphone mode on or off | Press | . |
Switch to a handset | Lift the handset. | |
Adjust the volume level for a call | Press | during a call or after invoking a dial tone. |
| ||
AutoAnswer with headset or speakerphone
When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings. Your system administrator configures AutoAnswer to use either the speakerphone or a headset. You may want to use AutoAnswer if you receive a high volume of incoming calls.
If you...
Use AutoAnswer with a headset
Use AutoAnswer with the speakerphone
Then...
Keep headset mode active (in other words, keep 
lit), even when you are not on a call.
To keep headset mode active, perform the following actions:
•Press EndCall to hang up.
•Press New Call or Dial to place new calls.
If your phone is set up to use AutoAnswer in headset mode, calls are automatically
answered only if 
is lit.
Otherwise, calls ring normally and you must answer them manually.
Keep the handset in the cradle and headset mode inactive (
unlit).
Otherwise, calls ring normally and you must answer them manually.
Note AutoAnswer is disabled when the Do Not Disturb feature is active.
Camera
Slide the privacy shutter slide switch to open or close the camera shutter.
The camera can only be used by one application at a time. If you launch another application that requires use of the camera while you are on a video call, that application may crash.
While an external camera is connected, it becomes the default camera for the phone application. Other applications continue to use the internal camera.
| Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1) |
6 |