Calling tasks
Call Park
•When you switch an active call from your mobile phone to a Cisco DX600 Series phone that shares the same line (Session Handoff), the phone disables the Call Forward feature. The Call Forward feature returns when the call ends.
•To verify that your primary line has Call Forward All enabled look for:
◦The call forward icon above your primary phone number.
◦The call forward target number in the status line.
Related Topics
Cisco Unified Communications Self Care Portal
Set up and cancel Call Forward All from phone
Procedure
Step 1 To set Call Forward All, tap Forward All Calls and enter a target phone number.
Step 2 To cancel Call Forward All, tap Forward All Calls.
Set up or cancel call forwarding
When call forwarding is enabled for any line other than the primary line, your phone does not provide you with confirmation that calls are being forwarded. Instead, you must confirm your settings in the User Options web pages.
Procedure
Step 1 Log in to your User Options web pages.
Step 2 Access your call forwarding settings.
Call Park
You park a call when you want to store the call so that you or someone else can retrieve it from another phone in the Cisco Unified Communications Manager system (for example, a phone at a coworker’s desk or in a conference room).
Use these methods to park a call:
•Call Park: Use Park to store the call. Your phone displays the call park number where the system stored your call. You must record this number and then use the same number to retrieve the call.
| Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1) |
36 |
|