Data Capture for
Workforce in Motion
RoadRunners BRR-L & BBR-LA Programming Guide
Important notice
Every effort is made to ensure the accuracy of our product information; however, we accept no responsability for errors or omissions including, but not limited to, the implied warranties of merchantability and
fi tness for a particular purpose. We shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this material.
Specifi cations or version may be subject to change without notice. The actual specifi cation and version are based on the product delivered.
Introduction
Scanning a series of programming bar code labels can confi gure the scanner.
The scanner must be properly powered before programming. The scanner will acknowledge a good and valid programming barcode label reading with two beeps and a green enlightening. It will give two other beeps (lower tone) and
a red enlightening of the RSL led for either an invalid or bad reading.
Please do not read the programming barcodes while being connected to the BaracodaManager.
PROGRAMMING OPTIONS:
Programmable options are divided into 2 groups. The first groups includes the options that show the general behaviour of the scanner. The second group sets the decoding parameters for each barcode symbology.
© Baracoda™ - November 2007
Baracoda, Inc. (US Office) | Baracoda SA (Europe Office: France) |
45 Main street - Suite 616 - Brooklyn, NY 11201 | 30 Avenue de l’Amiral Lemonnier - 78160 |
Ph: 718 488 9600 - Fx: 718 488 9601 | Ph: +33 1 30 08 89 00 - Fx: +33 1 30 08 89 98 |
The bluetooth name and Bluetooth registered trademarks are owned by Bluetooth SIG, Inc., and are used by Baracoda under license. The Baracoda names and
Baracoda trademarks are own by Baracoda. All specifications are subject to change without notice - Non contractual pictures © Baracoda - All rights reserved