Cisco Systems ONS 15454 manual DLP-A549 View IS-IS Routing Information Base, 22-54

Page 54

Chapter 22 DLPs A500 to A599

DLP- A549 View IS-IS Routing Information Base

DLP-A549 View IS-IS Routing Information Base

Purpose

This task allows you to view the Intermediate System to Intermediate

 

System (IS-IS) protocol routing information base (RIB). IS-IS is an OSI

 

routing protocol that floods the network with information about NEs on the

 

network. Each NE uses the information to build a complete and consistent

 

picture of a network topology. The IS-IS RIB shows the network view from

 

the perspective of the IS node.

Tools/Equipment

None

Prerequisite procedures

DLP-A60 Log into CTC, page 17-69

Required/As needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

Step 1 In the node view, click the Maintenance > OSI > IS-IS RIB tabs.

Step 2 View the following RIB information for Router 1:

•Subnet Type—Indicates the OSI subnetwork point of attachment type used to access the destination address. Subnet types include SDCC, LDCC, GCC, OSC, and LAN.

•Location—Indicates the OSI subnetwork point of attachment. For DCC subnets, the slot and port are displayed. LAN subnets are shown as LAN.

•Destination Address—The destination NSAP (network service access point) of the IS.

•MAC Address—For destination NEs that are accessed by LAN subnets, the NE’s Media Access Control address.

Step 3 If additional routers are enabled, you can view their RIBs by choosing the router number in the Router field and clicking Refresh.

Step 4 Return to your originating procedure (NTP).

 

Cisco ONS 15454 Procedure Guide, R7.0

22-54

November 2007

Page 53 Page 55
Image 54
Page 53 Page 55
Contents DLP-A507 View OC-N PM Parameters 22-122-2 Card ViewClick the Performance Ether Ports Statistics tabs DLP-A509 Provision CE-1000-4 Ethernet PortsClick the Provisioning Ether Ports tabs 22-3DLP-A510 Provision a DS-3 Circuit Source and Destination 22-4DLP-A512 Change Node Access and PM Clearing Privilege 22-5DLP-A513 Provision CE-100T-8 Ethernet Ports 22-622-7 DLP-A514 Provision CE-100T-8 and CE-1000-4 POS Ports Click the Performance POS Ports Statistics tabs22-8 DLP-A517 View Alarm or Event History Click the History Shelf tabs22-9 DLP-A518 Create a New or Cloned Alarm Severity Profile Alarm Profile Editor tabs Figure22-10 Node View Alarm Profile Editor 22-1122-12 22-13 Store Profiles Dialog BoxDLP-A519 Apply Alarm Profiles to Ports Click the Provisioning Alarm Profiles Alarm Behavior tabs22-14 DLP-A520 Delete Alarm Severity Profiles 22-1522-16 Select Node/Profile Combination For Delete Dialog BoxAlarm Filter Dialog Box General Tab 22-17Alarm Filter Dialog Box Conditions Tab 22-18DLP-A522 Suppress Alarm Reporting 22-19DLP-A523 Discontinue Alarm Suppression 22-20DLP-A524 Download an Alarm Severity Profile 22-21Click OK Or Sonet Thresholds subtab22-22 Parameter Description Options 22-23IS-NR 22-2422-25 DLP-A527 Change the OC-N Card ALS Maintenance Settings 22-26Cisco ONS 15454 Reference Manual 22-27DLP-A528 Change the Default Network View Background Map DLP-A529 Delete Ethernet Rmon Alarm Thresholds22-28 DLP-A530 Install the Tie-Down Bar 22-29DLP-A531 Print CTC Data 22-3022-31 Selecting CTC Data For PrintDLP-A532 Export CTC Data 22-3222-33 DLP-A533 Create Ethernet Rmon Alarm Thresholds 22-34Variable Definition 22-3522-36 22-37 22-38 22-39 DLP-A534 Provision OSI Routing Mode 22-40Node view, click the Provisioning OSI Tarp Config tabs DLP-A535 Provision or Modify Tarp Operating Parameters22-41 22-42 Node view, click the Provisioning OSI Tarp Static TDC tabs Click Add Static Entry22-43 DLP-A538 Add a Tarp Manual Adjacency Table Entry Click Delete Static Entry22-44 DLP-A539 Provision OSI Routers 22-45DLP-A541 Enable the OSI Subnet on the LAN Interface DLP-A540 Provision Additional Manual Area Addresses22-46 22-47 DLP-A542 Create an IP-Over-CLNS Tunnel 22-48DLP-A544 Change the OSI Routing Mode DLP-A543 Remove a Tarp Manual Adjacency Table Entry22-49 22-50 Node view, click the Provisioning OSI Routers Subnet tabs DLP-A545 Edit the OSI Router ConfigurationDLP-A546 Edit the OSI Subnetwork Point of Attachment 22-51DLP-A547 Edit an IP-Over-CLNS Tunnel 22-52DLP-A548 Delete an IP-Over-CLNS Tunnel 22-53DLP-A549 View IS-IS Routing Information Base 22-54DLP-A551 Manage the Tarp Data Cache Node view, click the Maintenance OSI ES-IS RIB tabsDLP-A550 View ES-IS Routing Information Base 22-55DLP-A552 Adjust the Java Virtual Memory Heap Size 22-5622-57 22-58 22-59 22-60 22-61 22-62 22-63 Click the Maintenance Protection tabs 22-6422-65 22-66
Related manuals
Manual 54 pages 43.54 Kb

ONS 15454 specifications

Cisco Systems ONS 15454 is a versatile optical networking platform designed to enable service providers and enterprises to deploy and manage robust optical networks efficiently. The ONS 15454 serves as a cornerstone in the evolution of transport networks, featuring various technologies that meet the increasing demand for bandwidth and service quality.

One of the standout features of the ONS 15454 is its support for multiple service types, including TDM, Ethernet, and Wavelength Division Multiplexing (WDM). This capability allows service providers to maximize network resources while delivering a wide range of services, from traditional voice to high-speed data and video.

The ONS 15454 leverages Dense Wavelength Division Multiplexing (DWDM) technology, enabling the transmission of multiple data streams over a single optical fiber. This effectively expands the network's capacity without the need for additional infrastructure, a crucial benefit in today's ever-growing data landscape. The system supports a variety of transponder modules, allowing for flexible scaling and seamless upgrades as bandwidth requirements increase.

Scalability is another key characteristic of the ONS 15454. With its modular architecture, it accommodates a range of interfaces and line cards, making it easier to tailor deployments to specific customer needs. This modularity not only facilitates upgrades but also simplifies maintenance, minimizing downtime and operational costs.

The platform also features advanced management capabilities through Cisco's Optical Network Management system. This allows for real-time monitoring, provisioning, and troubleshooting, ensuring network reliability and performance. The intuitive interface and comprehensive reporting tools enable operators to gain insights into network operations, improving decision-making processes.

Furthermore, the ONS 15454 is built to support optical layer protection features, enhancing network resilience. Technologies such as Automatic Protection Switching (APS) and Optical Supervisory Channel (OSC) ensure that connectivity is maintained even in the event of a failure, crucial for mission-critical applications.

In conclusion, the Cisco ONS 15454 is a powerful optical networking solution that combines flexibility, scalability, and advanced management features. Its support for various services and technologies positions it as an essential asset for organizations looking to build a future-proof network capable of handling increasing data traffic while maintaining high service standards.
Top Page Image Contents