Cisco Systems ONS 15454 DLP-A517 View Alarm or Event History, Click the History Shelf tabs, 22-9

Page 9

Chapter 22 DLPs A500 to A599

DLP- A517 View Alarm or Event History

DLP-A517 View Alarm or Event History

Purpose

Tools/Equipment

Prerequisite Procedures

Required/As Needed Onsite/Remote

Security Level

This task is used to view past cleared and uncleared ONS 15454 alarm messages at the card, node, or network level. This task is useful for troubleshooting configuration, traffic, or connectivity issues that are indicated by alarms.

None

DLP-A60 Log into CTC, page 17-69

As needed

Onsite or remote

Retrieve or higher

Step 1 Decide whether you want to view the alarm message history at the node, network, or card level. Step 2 To view node alarm history:

a.Click the History > Session tabs to view the alarms and conditions (events) raised during the current session.

b.Click the History > Shelf tabs.

If you check the Alarms check box, the node’s alarm history appears. If you check the Events check box, the node’s Not Alarmed and transient event history appears. If you check both check boxes, you will retrieve node history for both alarms and events.

c.Click Retrieve to view all available messages for the History > Shelf tabs.

Note Alarms can be unreported when they are filtered out of the display using the Filter button in either tab. See the “DLP-A225 Enable Alarm Filtering” task on page 19-17for information.

Tip Double-click an alarm in the alarm table or an event (condition) message in the history table to display the view that corresponds to the alarm message. For example, double-clicking a card alarm takes you to card view. In network view, double-clicking a node alarm takes you to node view.

Step 3 To view network alarm history, from node view:

a.From the View menu choose Go to Network View.

b.Click the History tab.

Alarms and conditions (events) raised during the current session appear.

Step 4 To view card alarm history from node view:

a.From the View menu choose Go to Previous View.

b.Double-click a card on the shelf graphic to open the card-level view.

Note TCC2/TCCP cards and cross-connect (XCVT, XC10G, or XC-VXL-10G) cards do not have a card view.

 

 

Cisco ONS 15454 Procedure Guide, R7.0

 

 

 

 

 

 

November 2007

 

 

22-9

 

 

 

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 22-1 DLP-A507 View OC-N PM ParametersCard View 22-2Click the Provisioning Ether Ports tabs DLP-A509 Provision CE-1000-4 Ethernet PortsClick the Performance Ether Ports Statistics tabs 22-322-4 DLP-A510 Provision a DS-3 Circuit Source and Destination22-5 DLP-A512 Change Node Access and PM Clearing Privilege22-6 DLP-A513 Provision CE-100T-8 Ethernet Ports22-7 DLP-A514 Provision CE-100T-8 and CE-1000-4 POS Ports Click the Performance POS Ports Statistics tabs22-8 DLP-A517 View Alarm or Event History Click the History Shelf tabs22-9 DLP-A518 Create a New or Cloned Alarm Severity Profile Alarm Profile Editor tabs Figure22-10 22-11 Node View Alarm Profile Editor22-12 Store Profiles Dialog Box 22-13DLP-A519 Apply Alarm Profiles to Ports Click the Provisioning Alarm Profiles Alarm Behavior tabs22-14 22-15 DLP-A520 Delete Alarm Severity ProfilesSelect Node/Profile Combination For Delete Dialog Box 22-1622-17 Alarm Filter Dialog Box General Tab22-18 Alarm Filter Dialog Box Conditions Tab22-19 DLP-A522 Suppress Alarm Reporting22-20 DLP-A523 Discontinue Alarm Suppression22-21 DLP-A524 Download an Alarm Severity ProfileClick OK Or Sonet Thresholds subtab22-22 22-23 Parameter Description Options22-24 IS-NR22-25 22-26 DLP-A527 Change the OC-N Card ALS Maintenance Settings22-27 Cisco ONS 15454 Reference ManualDLP-A528 Change the Default Network View Background Map DLP-A529 Delete Ethernet Rmon Alarm Thresholds22-28 22-29 DLP-A530 Install the Tie-Down Bar22-30 DLP-A531 Print CTC DataSelecting CTC Data For Print 22-3122-32 DLP-A532 Export CTC Data22-33 22-34 DLP-A533 Create Ethernet Rmon Alarm Thresholds22-35 Variable Definition22-36 22-37 22-38 22-39 22-40 DLP-A534 Provision OSI Routing ModeNode view, click the Provisioning OSI Tarp Config tabs DLP-A535 Provision or Modify Tarp Operating Parameters22-41 22-42 Node view, click the Provisioning OSI Tarp Static TDC tabs Click Add Static Entry22-43 DLP-A538 Add a Tarp Manual Adjacency Table Entry Click Delete Static Entry22-44 22-45 DLP-A539 Provision OSI RoutersDLP-A541 Enable the OSI Subnet on the LAN Interface DLP-A540 Provision Additional Manual Area Addresses22-46 22-47 22-48 DLP-A542 Create an IP-Over-CLNS TunnelDLP-A544 Change the OSI Routing Mode DLP-A543 Remove a Tarp Manual Adjacency Table Entry22-49 22-50 DLP-A546 Edit the OSI Subnetwork Point of Attachment DLP-A545 Edit the OSI Router ConfigurationNode view, click the Provisioning OSI Routers Subnet tabs 22-5122-52 DLP-A547 Edit an IP-Over-CLNS Tunnel22-53 DLP-A548 Delete an IP-Over-CLNS Tunnel22-54 DLP-A549 View IS-IS Routing Information BaseDLP-A550 View ES-IS Routing Information Base Node view, click the Maintenance OSI ES-IS RIB tabsDLP-A551 Manage the Tarp Data Cache 22-5522-56 DLP-A552 Adjust the Java Virtual Memory Heap Size22-57 22-58 22-59 22-60 22-61 22-62 22-63 22-64 Click the Maintenance Protection tabs22-65 22-66
Related manuals
Manual 54 pages 43.54 Kb

ONS 15454 specifications

Cisco Systems ONS 15454 is a versatile optical networking platform designed to enable service providers and enterprises to deploy and manage robust optical networks efficiently. The ONS 15454 serves as a cornerstone in the evolution of transport networks, featuring various technologies that meet the increasing demand for bandwidth and service quality.

One of the standout features of the ONS 15454 is its support for multiple service types, including TDM, Ethernet, and Wavelength Division Multiplexing (WDM). This capability allows service providers to maximize network resources while delivering a wide range of services, from traditional voice to high-speed data and video.

The ONS 15454 leverages Dense Wavelength Division Multiplexing (DWDM) technology, enabling the transmission of multiple data streams over a single optical fiber. This effectively expands the network's capacity without the need for additional infrastructure, a crucial benefit in today's ever-growing data landscape. The system supports a variety of transponder modules, allowing for flexible scaling and seamless upgrades as bandwidth requirements increase.

Scalability is another key characteristic of the ONS 15454. With its modular architecture, it accommodates a range of interfaces and line cards, making it easier to tailor deployments to specific customer needs. This modularity not only facilitates upgrades but also simplifies maintenance, minimizing downtime and operational costs.

The platform also features advanced management capabilities through Cisco's Optical Network Management system. This allows for real-time monitoring, provisioning, and troubleshooting, ensuring network reliability and performance. The intuitive interface and comprehensive reporting tools enable operators to gain insights into network operations, improving decision-making processes.

Furthermore, the ONS 15454 is built to support optical layer protection features, enhancing network resilience. Technologies such as Automatic Protection Switching (APS) and Optical Supervisory Channel (OSC) ensure that connectivity is maintained even in the event of a failure, crucial for mission-critical applications.

In conclusion, the Cisco ONS 15454 is a powerful optical networking solution that combines flexibility, scalability, and advanced management features. Its support for various services and technologies positions it as an essential asset for organizations looking to build a future-proof network capable of handling increasing data traffic while maintaining high service standards.
Top Page Image Contents