Cisco Systems uBR7200 manual Regulatory Standards Compliance, Specification Description

Regulatory Standards Compliance

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Note Equipment must be installed and operated using the relevant manuals and only installed with the correct cables and connectors. Cisco Systems Inc. is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible party:

Cisco Systems Inc.

170 West Tasman Drive San Jose, CA 95134 USA

+408 526-7208

Regulatory Standards Compliance

This section includes all regulatory, safety, EMC (Class A or Class B), telecom, and NEBS standards. The Cisco uBR7200 Series Universal Broadband Routers and components are in compliance with national and international standards as described in Table 1.

Table 1	Regulatory Standards Compliance
Specification		Description
Regulatory Compliance		Products with the CE Marking indicate compliance with the 89/336/EEC
		January 2002 , which includes the safety and EMC standards listed.
Safety		UL 60950
		CAN/CSA-C22.2 No. 60950
		EN 60950
		IEC 60950
		AS/NZS 60950
		IEC 60825-1
		IEC 60825-2
		EN 60825-1
		EN 60825-2
		21 CFR 1040
		FCC OET 65
		FCC OET 65-C
		RSS-102

Regulatory Compliance and Safety Information for the Cisco uBR7200 Series Universal Broadband Routers

78-14140-05 73