Chapter 3 Configuration
Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters (case sensitive).
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric characters (case sensitive).
Service Name: This item is for identification purpose. If it is required, your ISP will provide you the information. Maximum input is 20 alphanumeric characters.
PPP Authentication Protocol Type: Default is Auto.
~Always on: if you want to establish a PPPoE session when starting up. It will also automatically
~Connect to Demand: if you want to establish a PPPoE session only when there is a packet requesting access to the Internet.
User Idle Timeout (in minutes):
Select one of the access methods among the 5 listed items and click Next to configure the right connection method. It is almost the same as PPPoE. Please refer to the above description and Section 3.5 Information from ISP.
is a short cut to the Quick Start page.
The
24