Cisco Systems AIR-CT2504-5-K9, 2500 manual Mounting the Controller on a Wall Rack-Mount Brackets

Page 13

Step 3 Place the switch on the table or shelf near an AC power source.

Note Allow 3 inches of space around the controller ventilation openings to prevent airflow restriction and overheating.

Step 4 After the controller is mounted on a shelf or desk, perform the following tasks to complete the installation:

Connecting the Controller Console Port

Securing the Power Adapter Cable

Connecting to the Network

Step 5 For configuration instructions about using the CLI setup program, see the “Running the Bootup Script and Power-On Self Test” section on page 23.

Mounting the Controller on a Wall (Rack-Mount Brackets)

The controller can be mounted on a wall using an optional rack-mount bracket kit that is not included with the controller. You can order a kit with 19-inch rack mounting brackets and hardware from Cisco. The kit part number is AIR-CT2504-RMNT.

Warning

Read the wall-mounting carefully before beginning installation. Failure to use the

 

correct hardware or to follow the correct procedures could result in a hazardous

 

situation to people and damage to the system. Statement 378

 

 

To mount the controller on a wall using rack-mount brackets, follow these steps:

Step 1 Attach the 19-inch brackets to each side of the 2504 controller as shown in Figure 5 with #10-32 flat head screws provided in the kit.

13

Image 13
Contents Cisco 2500 Series Wireless Controller Safety Information FCC Safety Compliance StatementSuitable grounding is available. Statement Introduction to the ControllerRegulations. Statement Typical Controller Topology and Network Connections Console Callout Port and LEDs State and DescriptionGreen or Blinking Green-Link activity Reset Ports and Slots State and Description Power 48VDCRequired Tools and Information Package ContentsInitial System Configuration Information Mounting the Controller Choosing a Physical LocationMounting the Controller on a Desktop or Shelf Situation to people and damage to the system. Statement Mounting the Controller on a Wall Rack-Mount BracketsBase Mount Mounting the Controller on a Wall Mounting Screws Mounting Screw Holes on the Back of the Controller Place the Controller on the Mounting Screws Top with the heaviest component at the bottom of the rack Are provided to ensure your safetyOr servicing the unit in the rack. Statement Attaching the 19-Inch Brackets to the Side of the Controller Mounting the Controller in a 19-Inch Rack Securing the Power Adapter Cable Connecting the Controller Console PortPlastic Relief Clip Installing a Security Lock Running the Bootup Script and Power-On Self TestCisco Systems Page License Agent ok Cisco Controller Loading primary image 7.0.114.76 100% Page License Agent ok Using the Startup WizardWizard Setting Action Requires a Radius server. Please see Wizard Setting Action Logging into the Controller Connecting to the Network Connecting Access Points Checking the Controller LEDs Using the Reset ButtonWhat’s New in Cisco Product Documentation Waarschuwing Belangrijke Veiligheidsinstructies Statement 1071-Warning DefinitionVaroitus Tärkeitä Turvallisuusohjeita Avvertenza Importanti Istruzioni Sulla Sicurezza Warnung Wichtige SicherheitshinweiseAviso Instruções Importantes DE Segurança TA Vare PÅ Disse InstruksjoneneVarning! Viktiga Säkerhetsanvisningar Page Page Page Page Page Statement 1015-Battery Handling Page Statement 1024-Ground Conductor Page Page Statement 1040-Product Disposal Page Page Statement 157-VCCI Compliance for Class B Equipment Statement 371-Power Cable and AC Adapter