Warning | There is the danger of explosion if the battery is replaced incorrectly. Replace the battery | |
|
| only with the same or equivalent type recommended by the manufacturer. Dispose of |
|
| used batteries according to the manufacturer’s instructions. Statement 1015 |
|
|
|
|
|
|
Warning | This equipment must be grounded. Never defeat the ground conductor or operate the | |
|
| equipment in the absence of a suitably installed ground conductor. Contact the |
|
| appropriate electrical inspection authority or an electrician if you are uncertain that |
|
| suitable grounding is available. Statement 1024 |
|
| |
|
|
|
Warning | Ultimate disposal of this product should be handled according to all national laws and | |
|
| regulations. Statement 1040 |
|
|
|
Safety Considerations
•Verify that the ambient temperature remains between 32 to 104° F (0 to 40° C), taking into account the elevated temperatures when installed in a rack or enclosed space.
•When multiple 2504 controllers are mounted in an equipment rack, be sure that the power source is sufficiently rated to safely run all the equipment in the rack (input: 100 to 240 VAC,
•Verify the integrity of the electrical ground before installing the controller.
Introduction to the Controller
The 2504 controller works in conjunction with Cisco lightweight access points and the Cisco Wireless Control System (WCS) to provide
The 2504 controllers supports up to 50 lightweight access points in increments of 5 access points with a minimum of 5 access points, making it a
3