Cisco Systems AIR-CT2504-5-K9, 2500 manual Wizard Setting Action

Note Press the hyphen key if you need to return to the previous command line.

Table 3	Startup Wizard Information
Wizard Setting		Action
System Name		Enter the system name, which is the name you
		want to assign to the controller. You can enter up
		to 31 ASCII characters.
Administrative user name		Enter the administrative user name to be assigned
		to this controller. You can enter up to 24 ASCII
		characters for each.
		The default administrative username is admin.
Administrative password		Enter the administrative password to be assigned
		to this controller. You can enter from 3 to 24
		ASCII characters for each.
		Note	There is no default administrative
			password, you must enter a password.
Management Interface IP Address		Enter the IP address of the management interface.
		The management interface is the default interface
		for in-band management of the controller and
		connectivity to enterprise services such as AAA
		servers.
		You can access the controller GUI interface using
		the management interface IP address.
Management Interface Netmask		Enter the IP address of the management interface
		netmask.
Management Interface Default Router		Enter the IP address of the default router.
Management Interface VLAN Identifier		Enter the VLAN identifier of the management
		interface (a valid VLAN identifier or 0 for an
		untagged VLAN).
		The VLAN identifier should be set to match the
		switch interface configuration.
Management Interface Port Num [1 to 4]		Enter the port number of the access point
		manager interface. Ports values are 1 to 4.

30