Cisco Systems AIR-CT2504-5-K9, 2500 manual Logging into the Controller

Table 3	Startup Wizard Information (continued)
Wizard Setting		Action
Enter a polling interval between 3600 and			Enter the polling interval between 3600 and
604800 secs			604800 seconds.
			Note	This prompt only displays if YES was
				entered in the “Configure a NTP Server
				Now?” prompt.
Configuration correct?			Enter yes if the configuration entered is correct.
			Values are yes and no. If yes is entered. the
			controller saves your configuration, reboots, and
			prompts you to log in.

5Logging into the Controller

To log into the 2504 controller, follow these steps:

Step 1 Enter a valid username and password to log into the controller CLI.

Note The administrative username and password you created in the startup wizard are case sensitive.

33