Cisco Systems AIR-CT2504-5-K9, 2500 manual Mounting the Controller on a Desktop or Shelf

Page 12

•Mounting the Controller on a Wall (Rack-Mount Brackets)

•Mounting the Controller on a Wall (Mounting Screws)

•Mounting the Controller in a Rack

Mounting the Controller on a Desktop or Shelf

Before mounting the controller on a desktop or shelf, install the rubber feet located in accessory kit shipped with the controller.

To install the rubber feet to the controller, follow these steps:

Step 1 Locate the adhesive strip with the rubber feet in the mounting-kit envelope.

Step 2 Remove the four rubber feet from the adhesive strip and attach the feet to the recessed areas on the bottom of the unit as shown in Figure 4.

Note We strongly recommend that you attach the rubber feet. Doing so helps prevent airflow restriction and overheating.

Figure 4 Installing the Rubber Feet on the Bottom of the Controller

282084

12

Image 12

Contents Cisco 2500 Series Wireless Controller FCC Safety Compliance Statement Safety InformationIntroduction to the Controller Suitable grounding is available. StatementRegulations. Statement Typical Controller Topology and Network Connections Callout Port and LEDs State and Description ConsoleGreen or Blinking Green-Link activity Reset Power 48VDC Ports and Slots State and DescriptionPackage Contents Required Tools and InformationInitial System Configuration Information Choosing a Physical Location Mounting the ControllerMounting the Controller on a Desktop or Shelf Mounting the Controller on a Wall Rack-Mount Brackets Situation to people and damage to the system. StatementBase Mount Mounting the Controller on a Wall Mounting Screws Mounting Screw Holes on the Back of the Controller Place the Controller on the Mounting Screws Are provided to ensure your safety Top with the heaviest component at the bottom of the rackOr servicing the unit in the rack. Statement Attaching the 19-Inch Brackets to the Side of the Controller Mounting the Controller in a 19-Inch Rack Connecting the Controller Console Port Securing the Power Adapter CablePlastic Relief Clip Running the Bootup Script and Power-On Self Test Installing a Security LockCisco Systems Page License Agent ok Cisco Controller Loading primary image 7.0.114.76 100% Page Using the Startup Wizard License Agent okWizard Setting Action Requires a Radius server. Please see Wizard Setting Action Logging into the Controller Connecting to the Network Connecting Access Points Using the Reset Button Checking the Controller LEDsWhat’s New in Cisco Product Documentation Statement 1071-Warning Definition Waarschuwing Belangrijke VeiligheidsinstructiesVaroitus Tärkeitä Turvallisuusohjeita Warnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaTA Vare PÅ Disse Instruksjonene Aviso Instruções Importantes DE SegurançaVarning! Viktiga Säkerhetsanvisningar Page Page Page Page Page Statement 1015-Battery Handling Page Statement 1024-Ground Conductor Page Page Statement 1040-Product Disposal Page Page Statement 371-Power Cable and AC Adapter Statement 157-VCCI Compliance for Class B Equipment