Cabletron Systems FOMIM-32, 36, 38 manual Installing the Fomim Into the Mmac

Installing the FOMIM into the MMAC

2.3INSTALLING THE FOMIM INTO THE MMAC

You can easily install the FOMIM into a Multi Media Access Center with a Flexible Network Bus (MMAC-FNB). Install the FOMIM into the MMAC as follows:

1.Power down the MMAC hub.

2.Remove any chassis safety bars present on the front of the MMAC hub.

3.Slide the FOMIM (Figure 2-1) into the card cage of the MMAC hub. Be sure that the card is properly aligned in the top and bottom slots of the card cage.

NOTE

Slot 1 of the MMAC hub is reserved for a management module (e.g., IRM3) only.

4.Firmly press the module connections into the backplane. Do not force the module into place or use the knurled knobs to draw the module into place.

5.Screw in the knurled knobs to secure the module to the MMAC.

6.Reinstall any chassis safety bars that were present on the MMAC.

FOMIM

MMAC-8FNB

Figure 2-1 Installing the FOMIM

FOMIM User’s Guide 2-3