Cabletron Systems E2100, E1100, E3100 manual Support@ctron.com

Page 27

INSTALLATION

The contents of the AUTOEXEC.BAT, CONFIG.SYS, PROTOCOL.INI, and NET.CFG files (if applicable).

You can contact Cabletron Systems Technical Support by:

Phone:

(603)

332-9400

FAX:

(603)

335-4743

BBS:

(603)

335-3358 (4 lines available)

Cabletron Technical Support can also be reached over the Internet by sending email to:

support@ctron.com

Drivers are available for anonymous FTP download from:

ctron.com (IP Address 134.141.197.25)

CompuServe subscribers can also contact Cabletron Technical Support through the Cabletron Forum by entering:

GO CTRON at any ! prompt.

If you have any questions, comments, or suggestions concerning this manual, you can write to Cabletron Systems Technical Support at:

Cabletron Systems, Inc.

35 Industrial Way, P.O. Box 5005

Rochester, NH 03867-0505

Page 2-17

Image 27
Contents Desktop Network Interface Products Page FCC Notice Contents Appendix a ADDRESS/INTERRUPT Tables Index Making Network ConnectionsChapter Introduction Using this Manual3 10BASE-T Twisted Pair Port Adapter FeaturesConnectivity Thin Ethernet PortFiber Optic Ports Jabber ProtectionLanview LEDs Collision Present CLN Software StatisticsRelated Manuals Adapter Models Chapter InstallationE1100/E2100 Series Adapters Model Number ReferencesPreparing the E1100 for Installation Unpacking the AdapterCopying the Software E1112 Adapter Preparing the E2100 for InstallationJP1, E1100/E2100 I/O base address Jumper Pins 220 280 300 Setting the I/O Base Address JumperI/O Address Space Requirements Installing a Boot PromInstalling the E1100/E2100 Adapters Backplate Detail Installing the E1100 Series Adapter Installing the E3100 Series Adapters Preparing the E3100 Series for Installation2 E3100 Series Boot Prom E3112 Adapter Installing the E3100 AdapterBackplate Thumbscrew Clip Adapter Edge Connector Expansion Slot Loading Network Software Copying the ADF FileSoftware Check List Troubleshooting Check List for AdaptersGetting Help Support@ctron.com Dimensions SpecificationsPower Requirements SafetyAttaching a UTP Segment Chapter Making Network ConnectionsTX+ Twisted Pair Requirements BNC Interface Coax Port Connecting to a THIN-NET SegmentThin-Net Requirements Attaching a Thin-Net SegmentConnecting to a Fiber Optic Link Segment Fiber Optic Requirements ST Fiber Optic ConnectorsFiber Optic Interface Fiber Optic Ports Wire Fault/Attachment LED AUI Port AUI Connector Screws AUI Cable Requirements AUI InterfaceTable A-1. I/O Ports of Common Devices Appendix a ADDRESS/INTERRUPT TablesA-2 Index Index