ATTACHING THE CONSOLE
CHAPTER 2
ATTACHING THE CONSOLE
This chapter describes information on the characteristics of supported terminals, configuring the management console and connecting the console cabling.
2.1LOCAL MANAGEMENT CONSOLE
MRXI/LM is accessed by attaching a management console at the DB-9 CONSOLE port on the rear panel of the MRXI (see Figure 2-1). The console connection supports a Digital Equipment Corporation VT200™ or VT300™ series terminal or PC emulation of one of these terminals.
DB-9
CONSOLE PORT
CONSOLE
CABLE
MANAGEMENT
TERMINAL
Figure 2-1. Management Console Connection
Table 2-1 lists the setup requirements for the local management console. If your terminal is a Digital Equipment Corporation VT200™ or VT300™ series terminal, press F3 to access the Setup Directory. If you have a terminal emulation of the Digital Equipment terminals, refer to your equipment user manual for setup procedures.
