Cabletron Systems MRXI 10BASE-T manual Chapter Using the DEVICE/PORT Information Screen

USING THE DEVICE/PORT INFORMATION SCREEN

CHAPTER 4

USING THE DEVICE/PORT

INFORMATION SCREEN

This chapter describes local management commands, field entries and statistical information presented on the MRXI/LM Device/Port Information screen.

The Device/Port Information screen, shown in Figure 4-1, summarizes HUB status and operational information related to the available Ethernet ports. The command menu at the bottom of the display lets you SAVE the current user defined fields, ENABLE and DISABLE Ports, RESET COUNTERS, EXIT from the local management session and provides access to the Community Names screen.

			Device/Port Information
Device Name:		MRXI			Ethernet Address:	00-00-1d-00-05-48
Set Modem Baud Rate: 9600					Set IP Address:	34.141.3.14
				Device	Port 2
Packets:				1619586	628104
Receive Collisions:				0		0
Transmit Collisions:				0		0
		Device Ports On:			12
		Device Ports Off:			2
		Port Media Type:			10BASE-T
		Port Administrative Status:			On
		Port Segmentation Status:			On
		Port Link Status:			NLNK
EXIT	SAVE		PORT 2	RESET COUNTERS		COMMUNITY NAMES
ENABLE PORT		DISABLE PORT		ENABLE ALL PORTS		DISABLE ALL PORTS

Figure 4-1. DEVICE/PORT Information Screen

The Device/Port Information screen presents information related to HUB and the port (1 through 14) currently selected by PORT n command as follows:

Page 4-1