Cabletron Systems MRXI 10BASE-T manual Chapter Using Community Names, Community Names Screen

USING COMMUNITY NAMES

CHAPTER 5

USING COMMUNITY NAMES

This chapter defines the fields found on the Community Names screen and describes entering and using the community names table. To access the Community Names Screen:

1.Use the arrow keys to highlight COMMUNITY NAMES at the bottom of the Device/Port Information Screen.

2.Press Return to display the Community Names Screen.

The Community Names Screen (see Figure 5-1) is an interactive table that lets you designate community names for SNMP compliant network management workstations, such as a PC running Remote LANVIEW/Windows, that can access the MRXI and receive alarms from the MRXI. The SAVE command saves the currently defined Community Names Table. Table entries take effect following a SAVE. The RETURN command displays the Device/Port Information Screen.

COMMUNITY NAMES

Please note: SU names are local passwords.

Community Name	Access	Traps	IP Address
public	RO	NO		0.0.0.0
ctron	RW	NO		0.0.0.0
	SU	NO		0.0.0.0
	NA	NO		0.0.0.0
	NA	NO		0.0.0.0
	NA	NO		0.0.0.0
	NA	NO		0.0.0.0
	NA	NO		0.0.0.0

RETURN SAVE

Figure 5-1. Community Names Screen

Page 5-1