GETTING STARTED
PASSWORD SCREEN
MRXI SNMP LOCAL MANAGEMENT
MAIN
DEVICE/PORT INFORMATION SCREEN
EXIT SAVE PORT n | RESET COUNTERS | ENABLE ALL PORTS |
ENABLE PORT DISABLE PORT | COMMUNITY NAMES | DISABLE ALL PORTS |
COMMUNITY NAMES
RETURN | SAVE |
Figure 3-1. MRXI/LM Screens
3.4ACCESSING LOCAL MANAGEMENT VIA TERMINAL
To use MRXI/LM, the console must be connected as described in Chapter 2, Attaching the Console. To access MRXI/LM:
1.If not already powered on, power on the MRXI.
2.Turn on power to the terminal. After a brief (approximately 5 seconds) warmup, the Password Screen appears (see Figure
3.If you are not using the password feature of MRXI/LM or if you have not yet applied your own password, press Return.
If you have applied a password known only to you, enter that password now, then press Return.
Page