Cabletron Systems MRXI 10BASE-T manual Device Information, Port Information

Page 25

USING THE DEVICE/PORT INFORMATION SCREEN

Device Information

Device Name: - is a name, up to 20 characters in length, that you can assign and enter to serve as a meaningful identifier for the HUB.

Set Modem Baud Rate: - allows changing the Console Port baud rate when using a modem.

Ethernet Address: - displays the Ethernet address of the HUB in hex.

Set IP Address: - displays the TCP/IP address currently assigned for the HUB. You can set this field according to your network requirements. Use the arrow keys to highlight the Set IP Address field and enter the desired IP address as 4 decimal values between

1 and 254 using a period as a separator between values as follows:

254.254.254.254

Packets: - displays the combined count of packets received by the HUB’s 14 Ethernet ports, up to a maximum of 4,294,967,295 packets.

Receive Collisions: - indicates the combined count of receive collisions detected.

Transmit Collisions: - indicates the combined count of transmit collisions detected.

Device Ports On: - shows the number of available HUB ports currently enabled.

Device Ports Off: - shows the number of available HUB ports currently disabled.

Port Information

Packets: - displays the number of packets received by the currently selected Ethernet port (Port n), up to a maximum of 4,294,967,295 packets.

Page 4-2

Image 25
Contents Cabletron SYSTEMS, P. O. Box 5005, Rochester, NH Page FCC Notice Contents Introduction ContentsUsing the DEVICE/PORT Using Community NamesContents Chapter Introduction Using this ManualMRXI/LM Introduction MrxiIntroduction Remote LANVIEW/WINDOWS Cabletron Systems MRX/MRXI 10BASE-T HUB Installation GuideRelated Manuals Getting HelpIntroduction Local Management Console Chapter Attaching the ConsoleTerminal Setup Requirements Xoff Menu Function SelectionAttaching the Console Console Cable Configuration Attaching the Console Attaching the Console Chapter Getting Started Using the Management KeyboardMRXI/LM Screens Understanding the Screens and CommandsDEVICE/PORT Information Screen Accessing Local Management VIA TerminalPassword Screen Mrxi Snmp Local Management Screen Cable Configuration Getting Started Accessing Local Management VIA ModemPin Male Connector Pin Female Connector Mrxi end Modem end Accessing Local ManagementGetting Started Getting Started Using the DEVICE/PORT Information Screen Chapter Using the DEVICE/PORT Information ScreenPort Information Device InformationSPIM-T1 Modified Screen Information has Been Saved Command Menu SelectionsCommunity Names Screen Chapter Using Community NamesCommunity Names Table Command Menu Selections Using Community Names MRXI/LM Messages Chapter MRXI/LM MessagesTOO Many Characters Entered Illegal Information EnteredMRXI/LM Messages Changing the MRXI/LM Password