Cabletron Systems TRFMIM-28 manual The Reset Switch

Page 23

The Reset Switch

Installing the 9H423-28 Module

The Reset Switch

The Reset switch is located on the front panel, under the top plastic tab as shown in Figure 2-4. It serves three functions: resetting the i960 processor, shutting down the module, or restarting the module.

•To reset the i960 processor, press the reset switch twice within three seconds.

•To shut down the module, press and hold the reset switch down for three or more seconds.

•To restart the module after it has been shut down, press and release the Reset Switch.

For security, SNMP management can be used to disable the functions of this switch.

Reset Switch

SMB CPU

Figure 2-4. The Reset Switch

2-7

Image 23

Contents 9032061-01 SmartSwitch 9H423-28 User’s GuidePage Copyright March 1998 by Cabletron Systems, Inc 35 Industrial Way DOC Notice FCC NoticeVCCI Notice Conformance to Directives/Product Standards DECLARATION OF CONFORMITY ADDENDUMNexus House, Newbury Business Park The FPIM-05 and FPIM-07 are Class 1 Laser Products Safety InformationCLASS 1 LASER TRANSCEIVERS CLASS 1 LASER TRANSCEIVERS Laser Radiation and Connectors Page Introduction ContentsInstalling the 9H423-28 Module Chapterviii SpeciﬁcationsContents Chapter IntroductionManagement FeaturesFast Packet Switching ProcessorThe 9H423-28 module provides MIB support including RMON RFC-1271 LANVIEW LEDs SMB CPU INB FAST ENET Figure 1-1. The 9H423-28 Module26X 25X FAST ENET 9H423-28Getting Help Related ManualsUnpacking the Module Installing the 9H423-28 ModuleInstalling an FEPIM User Accessible Components Setting the Module DIP Switch See the Cautions at the end of this table Table 2-1. Function of DIP SwitchInstalling the Module in the SmartSwitch 9000 Chassis Module Figure 2-3. Installing the ModulePlastic Tab Jack for ESD Wrist Strap Metal Back-PanelReset Switch The Reset SwitchInstalling the 9H423-28 Module Operation Operation ENIB/FENIBVLAN SmartSwitch ASICTraditional Switch VLAN Domains Fully-Meshed VLAN Domains SecureFast VLAN SwitchesSMB-1 Bus i960 CoreINB NIB System Management BusesSMB-10 Bus System Diagnostic ControllerDC/DC Converter INB InterfaceLowest Slot Number Level ITDM Arbitration LevelsITDM RAM Allocation Level Round Robin Arbitration LevelMonarch/Slave SmartSwitch 9000 Modules 3-10 System Status INB Transmit Port Receive LANVIEW LEDsINB Receive Port TransmitLANVIEW LEDs The function of the INB Receive LEDs is listed in TableThe function of the INB Transmit LEDs is listed in Table Table 4-5. Port Transmit LEDs The function of the Port Receive LEDs is listed in TableThe function of the Port Transmit LEDs is listed in Table Table 4-4. Port Receive LEDsLANVIEW LEDs Standards SpeciﬁcationsTechnical Speciﬁcations MemoryWeight SafetyService DimensionsStorage Temperature EnvironmentOperating Temperature 5 to 40 CSpeciﬁcations Appendix A FEPIM SpeciﬁcationsFE-100TX FE-100FXFEPIM Speciﬁcations FE-100FX