Cabletron Systems TRFMIM-28 manual The function of the Port Receive LEDs is listed in Table

Page 37

LANVIEW LEDs

The function of the Port Receive LEDs is listed in Table 4-4.

	Table 4-4. Port Receive LEDs

LED Color	State


Green	Link, no activity port enabled

Green (Blinking)	Link, port disabled

Yellow (Flashing)	Link, activity, port enabled (ﬂashing to steady on indicates rate)

Red	Fault

Off	No link, (port disabled)

The function of the Port Transmit LEDs is listed in Table 4-5.

	Table 4-5. Port Transmit LEDs

LED Color	State


Green (Flashing)	Data activity (ﬂashing to steady on indicates rate)

Yellow (Blinking)	Port in standby state

Red (Flashing)	Collision (with collision rate)

Red	Fault

Off	No activity, port can be disabled or enabled

4-3

Image 37

Contents 9032061-01 SmartSwitch 9H423-28 User’s GuidePage Copyright March 1998 by Cabletron Systems, Inc 35 Industrial Way VCCI Notice FCC NoticeDOC Notice Nexus House, Newbury Business Park DECLARATION OF CONFORMITY ADDENDUMConformance to Directives/Product Standards CLASS 1 LASER TRANSCEIVERS Safety InformationThe FPIM-05 and FPIM-07 are Class 1 Laser Products CLASS 1 LASER TRANSCEIVERS Laser Radiation and Connectors Page Installing the 9H423-28 Module ContentsChapter IntroductionContents Speciﬁcationsviii Chapter IntroductionFast Packet Switching FeaturesProcessor ManagementThe 9H423-28 module provides MIB support including RMON RFC-1271 LANVIEW LEDs 26X 25X Figure 1-1. The 9H423-28 ModuleFAST ENET 9H423-28 SMB CPU INB FAST ENETGetting Help Related ManualsInstalling an FEPIM Installing the 9H423-28 ModuleUnpacking the Module User Accessible Components Setting the Module DIP Switch See the Cautions at the end of this table Table 2-1. Function of DIP SwitchInstalling the Module in the SmartSwitch 9000 Chassis Plastic Tab Jack for ESD Wrist Strap Figure 2-3. Installing the ModuleMetal Back-Panel ModuleReset Switch The Reset SwitchInstalling the 9H423-28 Module Operation Operation ENIB/FENIBTraditional Switch SmartSwitch ASICVLAN VLAN Domains Fully-Meshed VLAN Domains SecureFast VLAN SwitchesINB NIB i960 CoreSystem Management Buses SMB-1 BusDC/DC Converter System Diagnostic ControllerINB Interface SMB-10 BusITDM RAM Allocation Level ITDM Arbitration LevelsRound Robin Arbitration Level Lowest Slot Number LevelMonarch/Slave SmartSwitch 9000 Modules 3-10 INB Receive LANVIEW LEDsPort Transmit System Status INB Transmit Port ReceiveThe function of the INB Transmit LEDs is listed in Table The function of the INB Receive LEDs is listed in TableLANVIEW LEDs The function of the Port Transmit LEDs is listed in Table The function of the Port Receive LEDs is listed in TableTable 4-4. Port Receive LEDs Table 4-5. Port Transmit LEDsLANVIEW LEDs Technical Speciﬁcations SpeciﬁcationsMemory StandardsService SafetyDimensions WeightOperating Temperature Environment5 to 40 C Storage TemperatureSpeciﬁcations FE-100TX FEPIM SpeciﬁcationsFE-100FX Appendix AFEPIM Speciﬁcations FE-100FX