Cabletron Systems FDDI manual Chapter INSTALLATION/REMOVAL, Unpacking the 7F06-02 Module

CHAPTER 3

INSTALLATION/REMOVAL

This chapter contains instructions for unpacking and installing the 7F06-2 Module in the:

•7C03 MMAC SmartSwitch

•7C04 Workgroup SmartSwitch

•7C04-R Workgroup SmartSwitch

Also included in the chapter are instructions for installing the front panel FPIMs.

3.1UNPACKING THE 7F06-02 MODULE

Unpack the 7F06-02 Module by using the following steps:

Before unpacking the 7F06-02 module, attach the antistatic wrist strap included with the SmartSwitch or SmartSwitch module by following the instructions printed on the package.

1.Carefully remove the module from the shipping box. (Save the box and packing materials in the event the module must be reshipped.)

2.Remove the module from the plastic bag. Observe all precautions to prevent damage from Electrostatic Discharge (ESD).

3.Carefully examine the module and check for damage. If damage exists, DO NOT install the module; contact Cabletron Systems Global Call Center.

7F06-02 FDDI SmartSwitch Interface Module User’s Guide 3-1