Cabletron Systems 3Com PortSwitch Hub manual CsEvFormat/Event00ea0048 No Probable cause message

Device Events and Alarms

Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)

Message in the Event Log	Alarm View Probable Cause
	Message
CsEvFormat/Event00ea0048	No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that either the main and backup rings have wrapped or that the wrap condition has been removed. The new wrap state is {I 1} (1=NotWrapped, 2=Wrapped). (event [{e}])

CsEvFormat/Event00ea0049

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that a MAU port {I 2} has had a change in attach state and the admin state of the port is disabled. The new attach state is {I 1} (1=Absent, 2=Present). (event [{e}])

CsEvFormat/Event00ea0050

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that the Ring In port has changed state while the mode is fail-safe. The new Ring In state is {I 1} (1=Open, 2=Wrap). (event [{e}])

CsEvFormat/Event00ea0051

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that the Ring Out port has changed state while the mode is fail-safe. The new Ring Out state is {I 1} (1=Open, 2=Wrap). (event [{e}])

CsEvFormat/Event00ea0060

No Probable cause message.

{d “%w- %d %m-, %Y - %T”} A 3Com Hub, {t} (name {m}) reports that a MAU port {I 2} has changed state due to operation of ZDL or DRI. The new MAU port state is {I 1} (1=Enabled, 2=Disabled). If disabled the reason is {I 3} (1=None, 2=Mgmt, 3=ZDL, 4=DRI). (event [{e}])

9032295 E2	Event and Alarm Messages
	4-9