SuperStack Application
This is a sequence of
For example, is a port can be connected to repeaters 55, 92, and 333, the encoding would be:
Repeater 55 | Repeater 92 | Repeater 333 |
|
|
|
00.37 | 00.5c | 01.4d |
|
|
|
The final value would be 00.37.00.5c.01.4d.
Conn Type
Displays the connector type. Possible values are Unknown, RJ45, Telco, ST, SMA,
SuperStack Application
This application suppports the SuperStack Configuration view. The model type name for this application is 3ComSSConfApp.
SuperStack Configuration View
This view provides the SuperStack Table.
Index
Displays a number used to identify individual devices in the stack. This value will usually be contiguous but gaps may be present due, for example, to unpowered devices.
Address
Displays the physical (MAC) address. Note that the index value can change if devices are inserted into the stack, but that the physical address will not.
Last Reset
Displays the time, in hundredths of a second, since this device was last reset. If a device is not operational, this will be zero.
Type
Displays a number that represents this type of device in the MIB.
The values of this integer are administered by allocating a MIB object identifier for each type of unit from a common branch. The value of this object is then the last level in that identifier. The values are defined in this MIB
Application Views | 3Com PortSwitch Hubs |
Management Module Guide |