Security Application
Local SNMP Application
Local SNMP Application
This application provides access to the Local SNMP view, allowing you to set SNMP Traps for this device. The model type for this application is 3ComSnmpApp2.
Local SNMP View
This view contains the following:
Next Free Index
Displays the index value for the next table entry.
Add Entry
Accesses the Add SNMP Table Entry view, which allows you to set the following values for a new entry.
SNMP Trap Table
This table stores the destination addresses of SNMP managers that wish to receive traps from this device.
Index
Displays the index for this entry.
Destination
Displays the network address of the device to which the SNMP traps will be sent.
Protocol
Displays the transport protocol to use when sending the trap. Possible values are IP, IPX, and None.
Community
Displays the SNMP community string to be used when sending the trap. You can update this field.
Application Views | 3Com PortSwitch Hubs |
Management Module Guide |