Serial I/f Application
Main Slot
Displays the slot number of the main port in the pair.
Main Port
Displays the port number of the main port in the pair.
Main State
Displays the state of the main port. Table
Table 5-12. Mrm Resilience Main or Standby States
Value | Description |
|
|
Failed | Loss of signal to the port |
|
|
OK | Port is capable of carrying traffic but is in the standby state |
|
|
OKandActive | Port is active |
|
|
SBY Slot
Displays the slot number of the standby port in the pair. You can update this field using the Mrm Resilience Table Entry view.
SBY Port
Displays the port number of the standby port in the pair. You can update this field using the Mrm Resilience Table Entry view.
SBY State
Displays the state of the main port. Table
Pair State
Displays the state of the resilient pair. Possible values are Operational and Invalid. When this field is Operational, all of the parameters in the entry are valid. When this field is Invalid, either information has been omitted, or the resilient pair rules are no longer valid because of a change in the configuration of the device, such as moving a card.
Mod State
Displays the Modification State of the resilient pair. You must set the Under Mod field in the Mrm Resilience Table Entry view to a value of
Pair Action
This field is used to change the state of the pair. Setting a value of Create configures the pair using the definitions in the entry. Setting Delete removes the entry from the table and terminates operation of resilience on this pair of ports. The setting TogglePort swaps the currently active port with the standby one if, and only if, the standby port has a status of OK.
Application Views | 3Com PortSwitch Hubs |
Management Module Guide |