Using LM to Create PVCs
3.3.8 Modifying a PVC
To modify an existing PVC, perform the following steps:
1.Use the arrow keys to highlight the VPI field and enter the VPI value you want to change.
NOTE |
LM automatically saves entries when you exit the field.
2.Use the arrow keys to highlight the VCI field and enter the VCI value you want to change.
3.Use the arrow keys to highlight the AAL Type field and press the SPACE bar until the desired AAL Type appears.
4.Use the arrow keys to highlight the Encapsulation Type field and press the SPACE bar until the desired Encapsulation Type appears.
5.Use the arrow keys to select the ADD/MODIFY command.
6.Press ENTER. The “ENTRY DELETED” then “ENTRY ADDED” messages appears at the top of the screen indicating that LM has modified the PVC.
| Page |