Using LIM to create PVCs
3.2.2 ATM Connection Tables Screen Commands
The following commands appear at the bottom of the ATM Connection Tables screen commands:
Save
This command lets you save all changes to the Connection Tables screen.
Clear VCCs
The Clear Virtual Channel Connection (VCC) command lets you clear all PVCs from the Connection Tables screen. This command does not let you clear SVCs from the Connection Tables screen because SVCs are dynamic connections that are created and deleted as required by applications, equipment, and ATM facilities.
NOTE |
Connection 1
Next/Previous
This command lets you scroll to the next screen or back to the previous screen. If the ATM Connection Tables screen has over 6 channels, it automatically continues onto a new screen.
Return
This command lets you exit from the ATM Connections Tables screen.
3.2.3 Using ATM Connection Tables Screen Commands
To use ATM Connection Tables screen commands, perform the following steps:
1.Use the arrow keys to highlight an ATM Connection Table screen command.
2.Press ENTER, LIM executes the selected command.
| Page |