Cabletron Systems manual BRIM-A6 Add/Delete Entry Screen Fields, Vpi

Page 30

Using LM to Create PVCs

3.3.5 BRIM-A6 Add/Delete Entry Screen Fields

The BRIM-A6 Add/Delete Entry screen lets you add, delete, or modify PVCs. This screen does not let you clear SVCs from the Connection Table screen.

NOTE

Connection 1 (VPI-0, VCI-14) and Connection 2 (VPI-0, VCI-15) are used by Fore Systems SPAN signalling and can not be deleted from the Connection Table screen.

The following list explains each of the BRIM-A6 Add/Delete Entry screen fields:

VPI

Use this field to enter the VPI of the PVC you want to add, delete or modify. This field allows values of 0-3.

VCI

Use this field to enter the VCI of the PVC you want to add, delete, or modify. This field allows values of 0-1023.

AAL Type

Use this field to select the ATM Adaptation Layer for the PVC you want to add, delete, or modify. Press the SPACE bar to toggle selections 5 (AAL-5) and 3/4 (AAL-3/4). The default selection is 5.

Encapsulation Type

Use this field to select the data encapsulation type used over AAL-5. Press the SPACE bar to select VC Mux Bridged 802.3 or LLC Encapsulation. The default selection is VC Mux Bridged 802.3.

BRIM-A6 User’s Guide

Page 3-11

Image 30
Contents BRIM-A6 USER’S Guide BRIM-A6 User’s Guide FCC Notice DOC NoticeVcci Notice Exclusion of Warranty and Disclaimer of Liability Cabletron SYSTEMS, INC. Program License AgreementCabletron Software Program License United States Government Restricted Rights Declaration of Conformity Contents Viii BRIM-A6 User’s Guide Using this Manual Chapter IntroductionDocument Conventions Following conventions are used throughout this documentBRIM-A6 Features BRIM-A6 OverviewEMI BRIM-A6 SpecificationsRelated Manuals EMCGetting Help Chapter Installation Unpacking the BrimInstalling Apims Installing an ApimInstalling Brims Installing a Brim in a MIMRemoving the Brim Coverplate Installing a Brim in a Hub BRIM-A6 User’s Guide Chapter Local Management Local Management Keyboard Conventions Keyboard Conventions FunctionUsing LIM to Create PVCs ATM Connection Tables ScreenATM Connection Tables Screen Fields ATM Connection Tables Screen Commands Using ATM Connection Tables Screen CommandsAdding PVCs to the Connection Tables Screen Deleting PVCs from the Connection Tables ScreenUsing LM to Create Pvcs BRIM-A6 Setup ScreenBRIM-A6 Setup Screen Fields VPIVCI BRIM-A6 Setup Screen Commands Using BRIM-A6 Setup Screen Commands Accessing the BRIM-A6 Add/Delete Entry ScreenBRIM-A6 Add/Delete Entry Screen Fields BRIM-A6 Add/Delete Entry Screen Commands Adding a PVCModifying a PVC Deleting a PVC Chapter BRIM-A6 LEDsApim LEDs Describes each of the Apim LEDsAppendix a Apim Specifications APIM-11 SpecificationsAPIM-21 Specifications APIM-22 Specifications APIM-29 SpecificationsAPIM-67 Specifications BNCAppendix B ATM Overview ATM BasicsATM Cell Figure B-1 ATM CellsBRIM-A6 User’s Guide B-3 ATM Network Virtual Channels and Virtual PathsPermanent and Switched Virtual Channels ATM ProtocolB-6 BRIM-A6 User’s Guide BRIM-A6 User’s Guide B-7 B-8 BRIM-A6 User’s Guide