Cabletron Systems manual 7H02-06 Module, Cable Type and FEPIMs

Page 10

Introduction

1.2 THE 7H02-06 MODULE

The 7H02-06 Module provides six Fast Ethernet ports via 5 RJ45 connectors and one FEPIM. The 7H02-06 Module can be installed in:

•The 7C03 MMAC SmartSwitch

•The 7C04 Workgroup SmartSwitch Chassis

•The 7C04-R Workgroup SmartSwitch Redundant Chassis

The 7H02-06 Module has one backplane connection and six front panel connections. The backplane connection provides power to the 7H02-06 Module and a channel for communication with the 7X00 SmartSwitch Control Module. The six front panel ports provide Category 5 Twisted Pair (UTP) and one user configurable port for UTP or multimode fiber optic connectivity (through the FEPIM).

1.2.1 Cable Type and FEPIMs

The 7H02-06 module has six front panel connectors that interface to the 7X00 SmartSwitch through the chassis backplane. 100 Base-TX connections are provided through 5 RJ45s; one FEPIM provides 100 Base-TX (via RJ45) or 100 Base-FX (via multimode SC).

Note: UTP operates at 10/100 Mbps, while Fiber operates at 100 Mbps. Both UTP and Fiber are capable of half or full duplex operation.

1-2

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 9031924 Page Page FCC Notice Vcci Notice Exclusion of Warranty Disclaimer of Liability Contents Appendix a Using this Manual Chapter Introduction7H02-06 Module Cable Type and FEPIMsH02-06 Module Features Lanview LEDsFE-100TX FEPIMsConnectivity Related Manuals Getting HelpChapter Network Requirements Fepim Module SpecificationsFE-100FX Transmitter power parameters are listed in Table FE-100TX and Fixed RJ45 PortsPin Number Represents Network Requirements Installing Fepims Chapter InstallationUnpacking the 7H02-06 Module Ejector Tab Screws INSTALLING/REMOVING the 7H02-06 Module Installing the 7H02-06 Module in a 7C03 Mmac SmartSwitchInstalling the 7H02-06 Module 7C03 Mmac SmartSwitch Removing the 7H02-06 Module from a 7C03 Mmac SmartSwitch Removing the 7H02-06 Module from a 7C03 Mmac SmartSwitchInstalling the 7H02-06 Module in a 7C04 or 7C04-R Chassis Power Removing the 7H02-06 Module from a 7C04 or 7C04-R Chassis XXX Installation Chapter Troubleshooting Shows the Lanview LEDs of the 7H02-06 ModuleIndicates the state of the receive port System Resources Chapter Technical SpecificationsSafety StandardsNetwork Interfaces ServiceImmunity PhysicalEnvironmental Technical Specifications Figure A-1.FE-100TX Pinouts Cable Type Worst Case Budget Typical Budget

7H02-06 specifications

Cabletron Systems, a pioneer in the networking and telecommunications industry, has produced the 7H02-06 model, a versatile and efficient network interface card (NIC) designed to enhance network performance and reliability. This advanced NIC is particularly well-suited for businesses seeking to optimize their data communication infrastructure.

One of the standout features of the Cabletron Systems 7H02-06 is its robust support for multiple network standards, enabling seamless integration into various network environments. The card is compatible with both Ethernet and Fast Ethernet, allowing users to harness the speed benefits of Fast Ethernet while maintaining backward compatibility with existing Ethernet installations. This feature significantly reduces the costs associated with upgrading network infrastructure.

The 7H02-06 also incorporates advanced technologies that enhance data transmission efficiency. It supports full-duplex operation, which allows for simultaneous sending and receiving of data. This capability effectively doubles the potential bandwidth of the network link, resulting in faster data transfer rates and improved overall performance.

In terms of characteristics, the Cabletron Systems 7H02-06 is designed with robust error-checking mechanisms, ensuring data integrity during transmission. The NIC utilizes sophisticated algorithms to detect and correct errors, which is critical for maintaining high levels of reliability in data communication.

Another key aspect of the 7H02-06 is its flexibility in network configuration. The card is equipped with multiple interface options, including the ability to connect to both coaxial and twisted-pair cabling. This versatility enables network administrators to tailor the card’s functionality to fit their specific network architecture, facilitating easier upgrades and expansions.

Moreover, the Cabletron Systems 7H02-06 is backed by a comprehensive suite of management tools, allowing organizations to monitor network performance, troubleshoot issues, and optimize configurations proactively. This level of control empowers IT teams to maintain a stable and efficient networking environment over time.

In conclusion, the Cabletron Systems 7H02-06 represents a significant advancement in network interface technology, integrating multiple standards, enhancing data transmission capabilities, and supporting flexible configurations. These features make it an ideal choice for businesses aiming to modernize their networking infrastructure while maximizing performance and reliability.
Top Page Image Contents