Cabletron Systems 7H02-06 manual FEPIMs, FE-100TX, Connectivity

Page 13

Introduction

1.3.2 FEPIMs

The front panel connections are standard Cabletron FEPIMs. Currently, the 7H02-06 supports the following two FEPIMs:

•FE-100TX (see Figure 1-2). The FE-100TX allows Fast Ethernet connectivity using Category 5 Twisted Pair (UTP) cabling with one RJ45 connector.

= X 10 100

FE-100TX

Figure 1-2. FE-100TX PIM.

•FE-100FX (see Figure 1-3). The FE-100FX allows Fast Ethernet connectivity using multi-mode ﬁber optic cabling with SC connector.

SP FE-100FX

Figure 1-3. FE-100FX PIM.

Refer to Appendix A of this manual for the speciﬁcations for these FEPIMs.

1.3.3 Connectivity

The 7H02-06 Module has one backplane connection and ﬁve front panel RJ45 connections and one FEPIM connection. The backplane connection provides power to the 7H02-06 Module and a channel for communication with the 7X00 SmartSwitch Control Module.

The six front panel ports provide Category 5 Twisted Pair (UTP) and/or multimode ﬁber optic connectivity.

1-5

Image 13

Contents 9031924 Page Page FCC Notice Vcci Notice Exclusion of Warranty Disclaimer of Liability Contents Appendix a Chapter Introduction Using this Manual Cable Type and FEPIMs 7H02-06 ModuleH02-06 Module Lanview LEDs FeaturesFE-100TX FEPIMsConnectivity Getting Help Related ManualsChapter Network Requirements Fepim Module SpecificationsFE-100FX FE-100TX and Fixed RJ45 Ports Transmitter power parameters are listed in TablePin Number Represents Network Requirements Installing Fepims Chapter InstallationUnpacking the 7H02-06 Module Ejector Tab Screws Installing the 7H02-06 Module in a 7C03 Mmac SmartSwitch INSTALLING/REMOVING the 7H02-06 ModuleInstalling the 7H02-06 Module 7C03 Mmac SmartSwitch Removing the 7H02-06 Module from a 7C03 Mmac SmartSwitch Removing the 7H02-06 Module from a 7C03 Mmac SmartSwitchInstalling the 7H02-06 Module in a 7C04 or 7C04-R Chassis Power Removing the 7H02-06 Module from a 7C04 or 7C04-R Chassis XXX Installation Shows the Lanview LEDs of the 7H02-06 Module Chapter TroubleshootingIndicates the state of the receive port Safety Chapter Technical SpecificationsSystem Resources StandardsImmunity ServiceNetwork Interfaces PhysicalEnvironmental Technical Speciﬁcations Figure A-1.FE-100TX Pinouts Cable Type Worst Case Budget Typical Budget