Cabletron Systems 7H02-06 manual Chapter Introduction, Using this Manual

Page 9

CHAPTER 1

INTRODUCTION

Welcome to Cabletron Systems 7H02-06 Fast Ethernet SmartSwitch™ Interface Module Installation Guide. This guide is a simple reference for installing and using the 7H02-06 Module. Before installing the module, carefully read this manual to gain a full understanding of its capabilities.

The 7H02-06 Module is a six port Fast Ethernet module that supports 10/100 operation in both half and full duplex. The 7H02- 06 Module supports auto negotiation allowing it to automatically use the fastest link both it and the attached device are capable of. Connectivity to the ports is provided by 5 RJ45 connectors and one Fast Ethernet Port Interface Module (FEPIM), allowing either Category 5 twisted pair or multimode fiber optic cabling. This module connects to a network and the 7X00 SmartSwitch Control Module in the 7C03, 7C04 or 7C04-R MMAC SmartSwitch via a SmartSwitch bus.

1.1 USING THIS MANUAL

Chapter 1, Introduction, discusses the capabilities and special features of Cabletron Systems 7H02-06 Module. This chapter also includes a list of related manuals.

Chapter 2, Network Requirements, contains a list of available FEPIMs and the network requirements that should be considered before installing the 7H02-06 Module.

Chapter 3, Installation, contains instructions for installing the 7H02-06 in the 7C03 MMAC SmartSwitch, the 7C04 Workgroup SmartSwitch or the 7C04-R Workgroup SmartSwitch.

Chapter 4, Troubleshooting, contains instructions for using LANVIEW® (Cabletron Systems built-in diagnostic and status monitoring system).

Chapter 5, Technical Specifications, provides detailed information about the physical characteristics of the 7H02-06 Module.

1-1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 9031924 Page Page FCC Notice Vcci Notice Exclusion of Warranty Disclaimer of Liability Contents Appendix a Chapter Introduction Using this ManualCable Type and FEPIMs 7H02-06 ModuleH02-06 Module Lanview LEDs FeaturesFEPIMs FE-100TXConnectivity Getting Help Related ManualsFepim Module Specifications Chapter Network RequirementsFE-100FX FE-100TX and Fixed RJ45 Ports Transmitter power parameters are listed in TablePin Number Represents Network Requirements Chapter Installation Installing FepimsUnpacking the 7H02-06 Module Ejector Tab Screws Installing the 7H02-06 Module in a 7C03 Mmac SmartSwitch INSTALLING/REMOVING the 7H02-06 ModuleInstalling the 7H02-06 Module 7C03 Mmac SmartSwitch Removing the 7H02-06 Module from a 7C03 Mmac SmartSwitch Removing the 7H02-06 Module from a 7C03 Mmac SmartSwitchInstalling the 7H02-06 Module in a 7C04 or 7C04-R Chassis Power Removing the 7H02-06 Module from a 7C04 or 7C04-R Chassis XXX Installation Shows the Lanview LEDs of the 7H02-06 Module Chapter TroubleshootingIndicates the state of the receive port Safety Chapter Technical SpecificationsSystem Resources StandardsImmunity ServiceNetwork Interfaces PhysicalEnvironmental Technical Specifications Figure A-1.FE-100TX Pinouts Cable Type Worst Case Budget Typical Budget

7H02-06 specifications

Cabletron Systems, a pioneer in the networking and telecommunications industry, has produced the 7H02-06 model, a versatile and efficient network interface card (NIC) designed to enhance network performance and reliability. This advanced NIC is particularly well-suited for businesses seeking to optimize their data communication infrastructure.

One of the standout features of the Cabletron Systems 7H02-06 is its robust support for multiple network standards, enabling seamless integration into various network environments. The card is compatible with both Ethernet and Fast Ethernet, allowing users to harness the speed benefits of Fast Ethernet while maintaining backward compatibility with existing Ethernet installations. This feature significantly reduces the costs associated with upgrading network infrastructure.

The 7H02-06 also incorporates advanced technologies that enhance data transmission efficiency. It supports full-duplex operation, which allows for simultaneous sending and receiving of data. This capability effectively doubles the potential bandwidth of the network link, resulting in faster data transfer rates and improved overall performance.

In terms of characteristics, the Cabletron Systems 7H02-06 is designed with robust error-checking mechanisms, ensuring data integrity during transmission. The NIC utilizes sophisticated algorithms to detect and correct errors, which is critical for maintaining high levels of reliability in data communication.

Another key aspect of the 7H02-06 is its flexibility in network configuration. The card is equipped with multiple interface options, including the ability to connect to both coaxial and twisted-pair cabling. This versatility enables network administrators to tailor the card’s functionality to fit their specific network architecture, facilitating easier upgrades and expansions.

Moreover, the Cabletron Systems 7H02-06 is backed by a comprehensive suite of management tools, allowing organizations to monitor network performance, troubleshoot issues, and optimize configurations proactively. This level of control empowers IT teams to maintain a stable and efficient networking environment over time.

In conclusion, the Cabletron Systems 7H02-06 represents a significant advancement in network interface technology, integrating multiple standards, enhancing data transmission capabilities, and supporting flexible configurations. These features make it an ideal choice for businesses aiming to modernize their networking infrastructure while maximizing performance and reliability.
Top Page Image Contents